Eco Friendly Sanitary Flow Meter with Stainless Steel Flange
Negotiable /Set
Min.Order:1 Set
Nanjing Metlan Measurement & Control Instrument Co., Ltd
Stainless Steel Flange Type Vortex Flow Meter For Steam / Air / Liquid
Diesel Fuel digital / Compact Flow Meter Electromagnetic Flameproof
1.6MPa Vortex Flow Meter Clamp On Flowmeter Corrosion Resistant
High Accuracy Insertion Magnetic Flow Meter For Big Diameter Pipeline
High Performance Precision Flow Meter Turbine Type With SS304 Material
Thread Type Good Repeatability Turbine Flow Meter For Chemical Industry
Eco Friendly Sanitary Flow Meter with Stainless Steel Flange
Advantage:
1). can be used in various explosion-proof places.
2). high resistance, fast response design can make undistorted collection of weak signal and fast
response to the flow changes
3). It has the function of low conductivity measurement.
4). tests full or empty pipe by adopting capacitance technology, which can avoid wrong alarms.
5). It has the consistency of converter’s interchange, which can avoid input parameters repeatedly.
6). Wide range of power supply mode is available
7). It adopts the international leading excitation technology, which circuit is simple, stable, and
reliable.
8). It provides the function of zero correction of sensor and automatic zero adjustment.
Instrument detection and maintenance
Electromagnetic flow converter has self-diagnosis function. In addition to the
power and hardware circuit fault, The system also give alarm to other faults
in general usage. These information are given accordingly prompts in the
lower right of the screen.
1,Maintenance and repair
a) Sensor installation site should be consistent with the section four
requirements, Please keep the housing clean and tidy;
b)Transmitter should be placed in a clean, ventilated, dry place;
c)Need to inspect every two years, for high precision users, instrument
need to be submitted to censorship.
2,Transportation, storage
a)The instrument must be packed before transportation, be carefully
handled when loading and unloading.
b)Storage site must be dry, ventilated, avoid corrosive gas erosion, the
ambient temperature is not too low or too high;
c)Storage time better not exceed three years.
3,Unpacking and checking
a) The packing can’t be opened with heavy hammer, and should be
careful not to damage the instrument
b) Check the content carefully according to the packing list.
Data sheet
MTF |
|||||
Divided type |
Integrated |
Explosion- |
Battery |
Heat(energy) type |
|
Accuracy |
±0.2% or ±0.5% |
||||
Diameter |
DN15~dn2400 |
DN15~DN600 |
DN25~DN1400 |
||
Flange |
Comply with GB9119 Standard carbon steel(stainless steel is optional) |
||||
Pressure |
DN15~DN1600 1.0, |
DN15~DN600 1.0, |
DN15~DN600 1.0,1.6,2.5, |
||
Please consult us if you need special pressure |
|||||
Liner |
PTFE,PU,CR,PFA,F46,IR |
||||
Conductivity |
≥5μs/cm(Please consult us if it is less than ≥5μs/cm) |
||||
Electrode |
316L,Hastelloy,Ti,Ta,PT-It |
||||
Protection Level |
IP67(For |
IP67 |
IP67 |
IP68 |
IP67 IP68 |
Medium Temperature |
-25℃~180℃ |
-25℃~80℃(Please |
-25℃~180℃ |
||
Influence of Ambient |
-25℃~60℃<±0.1%/10℃ or<±0.25%/10℃ |
||||
Repetition |
≤±0.1%,±0.25% |
||||
Analog output Error
Miss. Angel
sale Manager
Chat Now
Telephone
86-025-53266120
Mobile
86-13770530824
Fax
86-025-52899138
Skype
service@metlan.com.c
Address
No.12, Rungu Road, Guli Industrial Zone, Jiangning District Xianyang,Shaanxi
Showroom
|