High Accuracy Electromagnetic Fluid Flow Meter Low Conductivity Measurement
Negotiable /Piece
Min.Order:1 Piece
Nanjing Metlan Measurement & Control Instrument Co., Ltd
High Performance Insertion Electromagnetic Flow Meter for DN3000 Pipe
Oil Industry Electromagnetic Flow Measurement , Industrial Flow Meter
Full Bore Electromagnetic Flow Meter IP68 Mag Flow Water Meter
IP65 IP67 IP68 MTF Battery Operated Flow Meter Explosion Proof Long Life Time
Intelligent Vortex Type Digital Liquid Flow Meter High Temperature
Gas Electronic Flowmeter Flow Meter Electromagnetic for City Administration
High Accuracy Electromagnetic Fluid Flow Meter Low Conductivity Measurement
Brief technical parameters
■ Ambient temperature-25℃---65℃
■ Ambient humidity≦95%
■ Medium temperature:-25℃--80℃(Note:The temperature is
different for each lining material, please advise when place
order.)
■ Casing protection level IP65,IP67,IP68
■ Flow range 0.5 --- 15m/s
■ Measuring diameter:DN10---DN2400
■ Electrode material:Standard 316L(other material is optional)
■ Flange installation:Comply with GB9119,carbon steel(stainless
steel is optional)
■ Pressure Grade:PN1.0;PN1.6;PN2.5;PN4.0 optional
■ Accuracy Grade:0.5 Grade,0.2 Grade
■ Measuring Parameters:instant flow ,instant flow rate
■ Record parameters : Total flow accumulated, 32 group event
record
■ Detection and alarm parameters:Pipe empty alarm, Excitation
current detection alarm
Battery capacity detection alarm
■ Flow curves: Automatically show flow percentage and curves.
■ Scaled output signal: Unit volume flow pulse
Linging Selection :
Lining material | Main Performance | Applied Scope |
PTFE |
Have the most stable chemical properties in plastics, and resist boiling hydrochlor and sulfuric acid, nitric acid aqua regia, strong alkali, and all kinds of organic solvents, but can not resist the corrosion of chlorine trifluoride, liquid fluorine, liquid oxygen and ozone.
Low abrasion resistance
3.Low negative pressure resistance |
1. -25℃-140℃ 2. Strong corrosion medium, like strong acid and alkali. 3.Healthcare medium |
CR | Oil proof, solvent resistance, oxidatite resistance and the resist the erosion of common medium like acid, alkali, salt, etc |
1.<80℃ 2.be able to measure sewage and mud |
PU |
Very good abrasive resistance, flexibility
2. Low acid and alkali resistance |
1. <65℃ 2. Neutral strong abrasion resistance medium |
Hard Rubber | Good resistance to room temperature, hydrochloric acid, acetic acid, oxalic acid, ammonia, phosphoric acid and 50% sulfuric acid, sodium hydroxide, potassium hydroxide Avoid strong oxidants |
1.<80℃ 2.General acid, alkali, salt solution |
PFA | can be used for most corrosive medium like acids, alkalis, and strong oxidant. 2.high material strength, resistance to aging, better than PTFE,EFP in high temperature Injection molding for higher negative pressure |
1.40-180℃ strong corrosion medium, like strong acid and alkali Healthcare medium |
MTF series magnetic flow meter selection table