Delivery Time:7 working days after received your payment
Certification:CE/CMC/ISO9001

Thread Type Good Repeatability Turbine Flow Meter For Chemical Industry

Quality of Metlan
We consistently implement our corporate philosophy: Stabilzation is the absolute

principle, all the stability of personnel and raw materials formed to keep the stability

of products while leaving the factory.After long-term continuous improvement, we

are keenly aware of your demand. Each of our Metlan products has been stictly

checked and tested to completely rule out your worries in the future.

Application:

It is widely used in the sealed pipelines which doesn’t have corrosion function on SS 1Cr18Ni9Ti , 

2Cr13,corundum Al2O3,and cemented carbide and have no fiber,particle and so on,the liquid with 

viscosity less than 5*10-6m2/s under working temperature, if the viscosity of the liquid is more than 

5*10-6m2/s,then the flow meter can be used after calibration.If it is equipped with other display 

devices with special functions,it can also do quantity control, excessive alarm and so on.It is really 

perfect in flow measurement and energy saving.

Product Description

LWGY series turbine flow meters have the features: high accuracy, good repeatability,

convenient installation/maintenance, simple structure etc.…………………………………….

Liquid flows through the turbine housing causing an internal rotor to spin. As the rotor spins,

an electrical signal is generated in the pickup coil. This signal is converted into engineering

units (liters, cubic meters, gallons etc.) on the local display where is applicable. Optional

accessory modules can be used to export the signal to other equipment.………..

Upon receipt, examine your meter for visible damage. The turbine is a precision measuring instrument and should be handled carefully. Remove the protective plugs and caps for a

thorough inspection. If any items are damaged or missing, contact SURE……

Make sure the turbine flow model meets your specific needs. For your future reference, it

might be useful to record this information on nameplate in the manual in case it becomes unreadable on the turbine.…