316L Smart Electromagnetic Flow Transmitter With Carbon Flange
Negotiable /Set
Min.Order:1 Set
Nanjing Metlan Measurement & Control Instrument Co., Ltd
50mm Acid Electromagnetic Flow Meter High Accurancy for City Administration
High Stability Electromagnetic Type Flow Meters For Water Self Diagnosis
Multi Language Integrated Electromagnetic Flow Meter , Electrical Flow Meter
High Accuracy Electromagnetic Fluid Flow Meter Low Conductivity Measurement
High Performance Insertion Electromagnetic Flow Meter for DN3000 Pipe
Oil Industry Electromagnetic Flow Measurement , Industrial Flow Meter
Divided Type Electromagnetic Flow Meter
Introduction:
Actually,the electromagnetic flow meter consists of two parts, transmitter and sensor, the
measuring electrodes inspect the electromotive force, and transmit to the converter, the
converter provides excitation current.
E is usually called a flow signal, after processing the flow signal by converter, output 4~20 mA
pulse(or frequency) signal which is proportional to the flow rate, then the flow rate recording,
adjusting can be achieved
Application
MTF electromagnetic flow meter is, a kind of instrument,used for measuring the
flow conductivity liquid, which is widely used in flow measuring of Metallurgy,
Chemical industry, Paper industry, Environmental protection, Oil industry,
Textile industry, Food industry and City administration, Water works,etc.
Features:
1). It applys “Fuzzy Algorithm” technology to the measurement of electromagnetic flow
and has the function of artificial intelligence.
2). igh resistance, fast response design can make undistorted collection of weak signal
and fast response to the flow changes. Its range rate can reach 100:1.
3). It has the function of low conductivity measurement.
4). It has the consistency of converter’s interchange, which can avoid input parameters
repeatedly.
5). It has lightning-protection and electricity-protection circuits. The effective, anti-interference
circuits apply to all kinds of bad environment.
6). It is the first domestic company that adopts the function of saving settings before delivery,
which can avoid the loss of the parameters.
7). Infrared remote control and button operation to make the operation more convenient.
8). Zero correction of sensor and automatic zero adjustment.
9). It has multi-language interface to satisfy all the users’ requirements.
10). It has the function of self-adjustment and self-checking.
Selection of Protection Level:
According to the GB4208-84 IEC standard (IEC529- 76) on the protection level:
IP65 : waterjet type; it allows the taps spray from all the directions of the instrument.
the pressure is 30kPa(0.3bar),th output of the water is 12.5l/m,and the taps is 3 meters far
from the instruments.
IP67 : antiimmersion type, it can be submerged in the water in a short time, when
testing, the highest point in the experiment should be at least 15cm underwater and last for at
least 30 minutes.
IP68: Submersible type, it can work in the water for long term, Its maximum depth in the
water should be consulted by the manufacturer and the user.
Site Picture: