Delivery Time:7 working days after received your payment
Certification:CE/CMC/ISO9001

SS304 High Temperature Intelligent Vortex Flow Meter Anti Interference

DN	A	B	C
25	65	65	368
32	66	65	374
40	80	76	382
50	80	89	388
65	93	102	402
80	100	114	408
100	126	136	435
125	146	160	463
150	166	182	489
200	196	248	543
250	210	282	596
300	240	334	648

Brief introduction:

Vortex Flowmeter is based on Von Karman’s Vortex Principle, 

which adopts piezoelectric crystal as testing components. It is a new

kind of stress detecting vortex flow meter.It has the advantages of 

wide range rate, high accuracy,low pressure loss, good medium generality, 

pulse signal output proportional to flow, convenient to connect with 

computer etc.As the detector probe of sensor and the vortex generating 

body are installed separately, and the high temperature resistant piezoelectric 

crystal does’t contact with medium, so the instrument is of simple structure, 

good generality, and high stability.

Features:

1) Measuring medium: Steam,gas, liquid(Avoid of multiple- direction fluid)

2) Accuracy:Liquid:1.0%  Gas:1.5%

3) Repeatability:Liquid 0.33%  Gas:0.5%

4) Range:Liquid:0.7m/s~7m/s   Gas:7m/s~40m/s

5) Working pressure:Standard 1.6MPa,2.5~4.0 MPa (on request)

6) Fluid temperature:-40℃~250℃(Common type)；100℃~350℃(High-temperature type)

7) Body material:304 stainless steel(SS316 is optional)

8) Output signal:Pulse(three wires,low level≤1V;High level≧4V);4~20mA;RS485

9) Power supply:24VDC(12VDC),Lithium battery 

10) Ambient temperature : -35 ℃ ~ 60 ℃ ( without LCD );  -5℃~60℃(with LCD)

11) Relative humidity:5~95%

12) Protection level:IP65

13) Electrical connection:M20*1.5

14) Explosion-proof:Optional

Application:

It is suitable for oil, chemical industry, metallurgy, heating power, spinning,
papermaking ,etc. Be use of control: over-heating vapor, saturation vapor, compressed air,

ordinary air(oxygen, nitrogen, hydrogen, natural gas, coal gas ,etc), water and liquid

(water, petrol , alcohol, benzene , etc.

Customer Order Information Table

Type	LUGB
Installation Method		D	Clamp type sensor
		F	Flange type sensor
			--L	Measure flow of liquid
			--G	Measure flow of gas
			--S	Measure flow of steam
Nominal Diameter				25	25mm
				32	32mm
				---	---
				80	80mm
				---	---
				300	300mm
Power Supply					A	Duplicate supply(24VDC/12VDC 3.6Lithium battery)
					D	3.6V Lithium battery
					E	24VDC/12VDC
Display						D	With digital display
						N	Without display
Output signal							N	No output
							P	Pulse
							A	4-20
							R	RS485
Sensor material								A	304 Stainless steel
								B	316L Stainless steel