Delivery Time:7 working days after received your payment
Certification:CE/CMC/ISO9001

SS304 Divided Type Magmeter Flow Meter with Stainless

Steel Flange
 

Working Principle

The Principle of the sensor is based on Faraday’s law of
electromagnetic induction.It is installed a pair of detection
electrodes on the pipe wall,where the measurement pipe axis
and magnetic field lines are vertical.When the conductive
liquid moves along the measurement pipe axis.The conductive
liquid cuts magnetic field lines and produces induced
electromagnetic force.Which can be measured by the two
electrodes on the meter pipe.The result can be calculated by
formula

Choosing lining

Lining material	Main Performance	Applied Scope
PTFE	Have the most stable chemical properties in plastics, and resist boiling hydrochlor and sulfuric acid, nitric acid aqua regia, strong alkali, and all kinds of organic solvents, but can not resist the corrosion of chlorine trifluoride, liquid fluorine, liquid oxygen and ozone. Low abrasion resistance 3.Low negative pressure resistance	1. -25℃－140℃ 2. Strong corrosion medium, like strong acid and alkali. 3.Healthcare medium
CR	Oil proof, solvent resistance, oxidatite resistance and the resist the erosion of common medium like acid, alkali, salt, etc	1.<80℃ 2.be able to measure sewage and mud
PU	Very good abrasive resistance, flexibility 2. Low acid and alkali resistance	1. <65℃ 2. Neutral strong abrasion resistance medium
Hard Rubber	Good resistance to room temperature, hydrochloric acid, acetic acid, oxalic acid, ammonia, phosphoric acid and 50% sulfuric acid, sodium hydroxide, potassium hydroxide Avoid strong oxidants	1.<80℃ 2.General acid, alkali, salt solution
PFA	can be used for most corrosive medium like acids, alkalis, and strong oxidant. 2.high material strength, resistance to aging, better than PTFE,EFP in high temperature Injection molding for higher negative pressure	1.40－180℃ strong corrosion medium, like strong acid and alkali Healthcare medium
FEP(F46)	hydrophobicity and non-viscous Corrosion resistance is inferior to PFA Negative pressure	1.40－180℃ strong corrosion medium, like strong acid and alkali Healthcare medium

Features:
1). It applys “Fuzzy Algorithm” technology to the measurement of electromagnetic flow 
and has the function of artificial intelligence.

2). It,s high resistance, fast response design can make undistorted collection of weak 

signal and fast response to the flow changes.Its range rate can reach 100:1.

3). It has the function of low conductivity measurement.

4). It has the consistency of converter’s interchange, which can avoid input parameters 

repeatedly.

5). Wide range of power supply mode is available (DC: 18V-36V/AC: 85V-265V).

6). It is the first domestic company that adopts the function of saving settings before delivery, 

which can avoid the loss of the parameters.

7). It has the function of infrared remote control and button operation so as to make the 

operation more convenient.

8). It provides the function of zero correction of sensor and automatic zero adjustment.

9). It has multi-language interface to satisfy all the users’ requirements.

10). It has the function of self-adjustment and self-checking.

11).It has lightning-protection and electricity-protection circuits.

Installation

         1,While installing flow meter, the medium flows direction must be the same with the flow

         meter label identifies

         2, To connect the flow meter flange with pipe flange via bolts,and check the tightness of

        the bolts in the day-to-day maintenance,to prevent loosening caused media leaks or other

        damage.