Delivery Time:7 working days after received your payment
Certification:CE/CMC/ISO9001

High Performance Precision Flow Meter Turbine Type With Ss304 Material

Function:

0.8--30KHzequal precision frequency measurement; width of the pulse can be displayed

Double circuits 12 digits DA output; DA output value can be arbitrarily set.

Double circuits alarm output, the parameters monitored can be arbitrarily set; higher and lower alarm can be arbitrarily

set.

Three circuits’ 12 digits input (temperature, pressure, battery voltage); 0-1000Hz frequency output; programmable

pulse output; time, instant flow rate and accumulative flow rate can be recorded; overall power consumption 200uA

Setting:

1. Long press Set key (3 seconds). When displaying 555, by pressing Inc & Shift key and enter corresponding

passwords; choose set and enter

2. Press Set to page down and press Shift to page up

3. When want to set parameters in a certain page, press Inc then start to flicker. Then use Inc and Shift to set. After

finishing, press Set and next line begins to fickle. Then set following the above method.

4. After finishing the set of a certain page, long press Set till no blink. This means exiting setting state

5. Shift + Set reset cumulant (need to press when the cumulant is flickering)

6. A menu parameter, factory password85 (B menu can revise this password)

Notice: In order to make sure the parameter setting of the LWGY-C flow meter is not changed at will, we will not provide you

specific setting state and passwords. The flow meter will be equipped with corresponding manual and user can also consult from the

manufacture. For the inconvenience brought, please understand.

                 Technical specification

Executive standard	Turbine flow meter(JB/T9246-1999)
Diameter& connection method	DN4-DN50: thread connection DN15-DN200:flange connection DN4-DN200:clamp connection
Accuracy	± 1%R,± 0.5%R,
Flow range ratio	1:10；1:15；1:20
Body material	304SS,316(L)etc.
Medium temperature(℃)	-20 ～＋ 120℃(special temperature can customize)
Ambient conditions	Temperature: -20 ～ +60℃ Relative humility:5％～ 90％ Pressure:86 ～ 106Kpa
Output signal	pulse,4-20mA
Communication output	RS485
Power supply	8-24VDC(optional)or 24VDC+3.6Vlithium battery
Signal transmission line	STVPV3 × 0.3(three-wire),2 × 0.3(two-wire)
Transmission distance	≤ 1000m
Line interface	Basic type:the aviation plug connector, Ex-proof type:internal thread M20 × 1.5
Ex-proof level	Non ex-proof,Exia Ⅱ CT4(intrinsic safety),Exia Ⅱ BT6(flameproof)
Protection level	IP65(Other protection levels can customize)

Detailed Pictures: