Delivery Time:7 working days after received your payment
Certification:CE/CMC/ISO9001

Anti Vibration Intelligent Vortex Flow Meter With Saturated Steam

Specification:

Measuring medium: Steam,gas, liquid(Avoid of multipledirection
fluid)
Accuracy:Liquid:1.0% Gas:1.5%
Repeatability:Liquid 0.33% Gas:0.5%
Range:Liquid:0.7m/s~7m/s Gas:7m/s~40m/s
Working pressure:Standard 1.6MPa,2.5~4.0 MPa (on request)
Fluid temperature:-40℃~250℃(Common type)；100℃~
350℃(High-temperature type)
Body material:304 stainless steel(SS316 is optional)
Output signal:Pulse(three wires,low level≤1V;High level≧4V);
4~20mA;RS485
Power supply:24VDC(12VDC),Lithium battery
Ambient temperature : -35 ℃ ~ 60 ℃ ( without LCD );
-5℃~60℃(with LCD)
Relative humidity:5~95%
Protection level:IP65
 

Advantage:

● The structure of Vortex flow meter is simple and strong, no
movable parts,and it is very stable.
● Simple installation and easy maintenance
● Wide measuring rang,the ratio is up to 10:1.
● Low pressure loss and operating costs.
● When measuring the volume of fluid,compensate as
required,replace parts without re-calibrate the flow meter.

Application:

(LUGB/E)series is suitable for oil,chemical industry,metallurgy,heating power,spinning,
papermaking ,etc. Be use of control: over-heating vapor, saturation vapor, compressed air,

ordinary air(oxygen, nitrogen, hydrogen, natural gas, coal gas ,etc),water and liquid (water,

petrol ,alcohol, benzene ,etc.

Installation:

Vortex flow meters have different structures and
installations,maintenance man should know the specific
structure, the convert signal,and all the links during the signal
transmission. In order to make sure the instrument can work
properly,the installation should follow the operated manual.
1.Reasonable installation site and enviroment.
Avoid strong electrical equipment, high-frequency
equipment , strong power switching devices; high temperature
heat source and the effects of radiation, and strong vibration
field and highly corrosive environments, think about the place
easy to instal and maintenance.
2.Enough straight pipe for up and down stream.
If there is a tapered tube with more than 15°located in the
upstream,then the upstream straight≧15D,the downstream
straight ≧5D.

Details: