Main Products: Sewage Treatment Equipment ,Submersible Sewage Pump ,Self Priming Sewage Pump
Stainless Steel Low Speed Propeller , Flow Banana Wastewater Submersible Propeller
Negotiable /Piece
Min.Order:1 Piece
Quick Details View All >
Business Type: Trading CompanyMain Products: Sewage Treatment Equipment ,Submersible Sewage Pump ,Self Priming Sewage Pump
Simple High Speed Roots Rotary Lobe Blower Horizontal Discharge Silencer Type
Portable Electric Sewage Submersible Pump 25 Meter Head For Pumping River Water
Industrial Wastewater Treatment Submersible Aerators 30m3/h Air volume 50Hz / 60Hz
Waste Water Treatment System Submersible Jet Aerators High Efficiency
Jet Flow Floating High Speed Surface Aerator With Drive Shaft Capacity 120 m/min
SUS304 High Efficiency Submersible Mixer 50Hz For Waste Water Treatment Plants
Product Details
Stainless Steel Low Speed Propeller , Flow Banana Wastewater Submersible Propeller
Features:
| 1 | The two rows of independent mechanical sealing ensure the long-term and reliable operation of the submersible motor. |
| 2 | The unique sealing design for the cables removes the hidden danger of water leakage of the cables. |
| 3 | The in-built leakage sensor and the device for the over temperature protection for the windings of the stator. |
| 4 | The vanes of the low-speed flow propeller are made of FRP, which are sweptback shape, have the self-cleaning function, the smooth and streamlined propeller surface distribut6es the propelling power equally. |
| 5 | The special installation systems for the submersible mixers can facilitate the quick installation and dismantling of the submersible mixers under the conditions of no need for draining off sewage from the pond. |
| 6 | While placing an order by customer. Please supply the pond depth H and drawing of the pond shape so as to determine the dimensions of the guide rod and the number of the supporting frames. |
Operation:
1. Test run
1) Before startup, competent professional personnel should inspect the whole system, to ensure it
conforming to requirements of relevant specifications. Connect the motor cable with power source
correctly.
2) In case of first commissioning, whether rotation direction of the impeller is correct or not should be
checked. The method is as follows: hang the low speed flow propeller on square guide bar, and
switch on power supply; seen in the direction from the impeller to the motor, the impeller should
rotate clockwise. If rotation direction is not correct, two phases of power cable should be changed. If
several flow propellers are connected with the same control cabinet, rotation direction of every flow
propeller should be checked individually.
Attention: During the check of rotation direction, rotating impeller should be guaranteed not to hurt
working personnel, and access to rotating impeller is not allowed.
2. Operation
1) After normal test run, the power should be cut off.
2) Put the flow propeller along square guide bar into the water, and guarantee its installation in correct
position. Switch on power supply to start operation and check whether it is normal.
Construction:
| No. | Name | Material | |
| GB | JIS | ||
| 1 | Propeller | FRP | FRP |
| 2 | Output shaft | 2Cr13 | SUS420J1 |
| 3 | Wheel boss | HT200 | FC200 |
| 4 | Mechanical seal | SiC-SiC | SiC-SiC |
| 5 | Mechanical seal stand | HT200 | FC200 |
| 6 | Decelerator | HT200 | FC200 |
| 7 | Leakage sensor | - | - |
| 8 | Bearing stand | HT200 | FC200 |
| 9 | Bearing | - | - |
| 10 | Sheath | HT200 | FC200 |
| 11 | Motor shaft | 2Cr13 | SUS420J1 |
| 12 | Slide sleeve | HT200 | FC200 |
Performance parameters:
Facebook
X
Pinterest
Linkedln