Low Noise Submersible Jet Aerators , Large Pond Water Aeration Systems
Negotiable /Set
Min.Order:1 Set
Unique Noise Free Jet Aerator Replacement High Efficiency Oxygen Dissolving
High Air Dissolving Rate Submersible Jet Aerators , Wastewater Water Pump Aerator
Electric Vertical Air Jet Aerator Submersible Type High Efficiency Oxygen Dissolving
Portable Submersible Water Aeration System Noise Free Easy Maintenance
Sewage Treatment Submersible Jet Aeration System Intensive Mixing Easy Installation
Underwater Jet Water Aeration System Quiet High Efficiency Easy Maintenance
Low Noise Submersible Jet Aerators , Large Pond Water Aeration Systems
Advantage:
1. It has unique design for gas mixture chamber whose intake air quantity is big.
2. Air can be mixed well with water
3. The chamber can produce minute and plenty of air bubble with high air dissolving rate.
4. The machine unit is designed to run in water with low winding number.
5. The machine unit is designed to run under water with low noise.
6. Overland air intake duct can be additionally equipped with silencer.
Structure:
NO, | Name | Material | NO, | Name | Material | |||
GB | JIS | GB | JIS | |||||
1 | Watertight cable | Rubber | 15 | Locked spacer | 0Cr19Ni9 | SUS304 | ||
2 | Sealing equipment of cable | 0Cr19Ni9 | SUS304 | 16 | Impeller nut | 0Cr19Ni9 | SUS304 | |
3 | Flying ring | 17 | Pump casing | HT200 | FC200 | |||
4 | Motor cover | HT200 | FC200 | 18 | Bottom cover | HT200 | FC200 | |
5 | Bearing | 19 | Sealing ring | |||||
6 | O-ring | Rubber | 20 | Strainer | HT200 | FC200 | ||
7 | Rotor | 21 | Air intake pipe | |||||
8 | Stator | 22 | Directing plate | HT200 | FC200 | |||
9 | Motor casing | HT200 | FC200 | 23 | Nozzle holder | HT200 | FC200 | |
10 | Shaft | 2Cr13 | SUS420J1 | 24 | Nozzle sleeve | 0Cr19Ni9 | SUS304 | |
11 | Mechanical seal | 25 | Shoe-shapped flange | HT200 | FC200 | |||
12 | Bracket | HT200 | FC200 | 26 | Attach device | HT200 | FC200 | |
13 | Oil tank cap | HT200 | FC200 | 27 | Divergent pipe | 0Cr19Ni9 | SUS304 | |
14 | Impeller | HT200 | FC200 |
Performance parameters:
Type | Power | Pole | Air capacity-water depth m³/h-m |
Oxygen transfer capacity kgO2/h |
Basin dimension | Workable water depth (m) |
|||
hp | kW | L(m) | W(m) | H(m) | |||||
JA-31-50 | 1 | 0.75 | 4 | 11-2 | 0.35-0.45 | 3 | 2 | 4 | 1-3 |
JA-32-80 | 2 | 1.5 | 4 | 22-3 | 1.0-1.2 | 4 | 3.5 | 4 | 1-3 |
JA-33-80 | 3 | 2.2 | 4 | 37-3 | 1.75-1.95 | 5 | 5 | 4.5 | 1.5-3.5 |
JA-35-100 | 5 | 3.7 | 4 | 75-3 | 3.5-3.95 | 6 | 6 | 5 | 2-4 |
JA-37-100 | 7.5 | 5.5 | 4 | 103-3 | 5.3-5.9 | 7 | 7 | 6 | 2-5 |
Before starting equipment:
1. Lifting and hanging the motor with the motor cable is prohibited during the transport and installation processes.
2. The submersible motor shall be put into water, operating the motor out of water is prohibited so as to prevent the motor from being burned due to its poor cooling.
Installati