Vertical Submersible Jet Aerators , Aeration Tank Sewage Water Pump Aerator
Negotiable /Set
Min.Order:1 Set
SUS304 Centrifugal Submersible Jet Aerators For Waste Water Treatment 220 Volt
Submersible Jet Pump Aerator Stable Intensive Mixing Easy Installation
Waste Water Treatment Submersible Jet Aerators 220V With Teco Motor
Small Jet Submersible Pump Aerator For Aquaculture High Filtration Rate
Submersible Sewage Water Jet Aeration System Stainless Steel For Aquaculture
Unique Submersible Jet Aerators , 6m Submergence Aquaculture Aerators
Vertical Submersible Jet Aerators , Aeration Tank Sewage Water Pump Aerator
Features:
1. The pressure produced by impeller through jet hole produces forceful water flow, which realize jet after mixed with air to make oxygen move efficiently in water.
2. It also can achieve good mixing effect.
3. The jet aerator can maintain the flow rate necessary for activated sludge floating.
4. It is widely used in industrial wastewater treatment, effluent treatment of livestock husbandry and general foul sewer aeration engineering.
5. Aeration tank of effluent facilities of factory applied with activated sludge method.
6. It can be used either individually or in a combined way
Structure:
NO, | Name | Material | NO, | Name | Material | |||
GB | JIS | GB | JIS | |||||
1 | Watertight cable | Rubber | 15 | Locked spacer | 0Cr19Ni9 | SUS304 | ||
2 | Sealing equipment of cable | 0Cr19Ni9 | SUS304 | 16 | Impeller nut | 0Cr19Ni9 | SUS304 | |
3 | Flying ring | 17 | Pump casing | HT200 | FC200 | |||
4 | Motor cover | HT200 | FC200 | 18 | Bottom cover | HT200 | FC200 | |
5 | Bearing | 19 | Sealing ring | |||||
6 | O-ring | Rubber | 20 | Strainer | HT200 | FC200 | ||
7 | Rotor | 21 | Air intake pipe | |||||
8 | Stator | 22 | Directing plate | HT200 | FC200 | |||
9 | Motor casing | HT200 | FC200 | 23 | Nozzle holder | HT200 | FC200 | |
10 | Shaft | 2Cr13 | SUS420J1 | 24 | Nozzle sleeve | 0Cr19Ni9 | SUS304 | |
11 | Mechanical seal | 25 | Shoe-shapped flange | HT200 | FC200 | |||
12 | Bracket | HT200 | FC200 | 26 | Attach device | HT200 | FC200 | |
13 | Oil tank cap | HT200 | FC200 | 27 | Divergent pipe | 0Cr19Ni9 | SUS304 | |
14 | Impeller | HT200 | FC200 |
Performance parameters:
Type | Power | Pole | Air capacity-water depth m³/h-m |
Oxygen transfer capacity kgO2/h |
Basin dimension | Workable water depth (m) |
|||
hp | kW | L(m) | W(m) | H(m) | |||||
JA-31-50 | 1 | 0.75 | 4 | 11-2 | 0.35-0.45 | 3 | 2 | 4 | 1-3 |
JA-32-80 | 2 | 1.5 | 4 | 22-3 | 1.0-1.2 | 4 | 3.5 | 4 | 1-3 |
JA-33-80 | 3 | 2.2 | 4 | 37-3 | 1.75-1.95 | 5 | 5 | 4.5 | 1.5-3.5 |
JA-35-100 | 5 | 3.7 | 4 | 75-3 | 3.5-3.95 | 6 | 6 | 5 | 2-4 |
JA-37-100 | 7.5 | 5.5 | 4 | 103-3 | 5.3-5.9 | 7 | 7 | 6 | 2-5 |
Product photo:
Control method:
1. Pay attention to the wiring method of JA submersible aerators
2. Correspondent protection devices such as over