High Air Dissolving Rate Submersible Jet Aerators , Wastewater Water Pump Aerator
Negotiable /Set
Min.Order:1 Set
Electric Vertical Air Jet Aerator Submersible Type High Efficiency Oxygen Dissolving
Portable Submersible Water Aeration System Noise Free Easy Maintenance
Sewage Treatment Submersible Jet Aeration System Intensive Mixing Easy Installation
Underwater Jet Water Aeration System Quiet High Efficiency Easy Maintenance
Stainless Steel Submersible Jet Aerators Noise - Free For Waste Water Treatment
Portable Sewage Water Submersible Jet Aerators Low Noise With 4 Pole
High Air Dissolving Rate Submersible Jet Aerators , Wastewater Water Pump Aerator
Features:
1. It has unique design for gas mixture chamber whose intake air quantity is big.
2. Air can be mixed well with water
3. The chamber can produce minute and plenty of air bubble with high air dissolving rate.
4. It is widely used in industrial wastewater treatment, effluent treatment of livestock husbandry and general foul sewer aeration engineering.
5. Aeration tank of effluent facilities of factory applied with activated sludge method.
6. It can be used either individually or in a combined way
Structure:
NO, | Name | Material | NO, | Name | Material | |||
GB | JIS | GB | JIS | |||||
1 | Watertight cable | Rubber | 15 | Locked spacer | 0Cr19Ni9 | SUS304 | ||
2 | Sealing equipment of cable | 0Cr19Ni9 | SUS304 | 16 | Impeller nut | 0Cr19Ni9 | SUS304 | |
3 | Flying ring | 17 | Pump casing | HT200 | FC200 | |||
4 | Motor cover | HT200 | FC200 | 18 | Bottom cover | HT200 | FC200 | |
5 | Bearing | 19 | Sealing ring | |||||
6 | O-ring | Rubber | 20 | Strainer | HT200 | FC200 | ||
7 | Rotor | 21 | Air intake pipe | |||||
8 | Stator | 22 | Directing plate | HT200 | FC200 | |||
9 | Motor casing | HT200 | FC200 | 23 | Nozzle holder | HT200 | FC200 | |
10 | Shaft | 2Cr13 | SUS420J1 | 24 | Nozzle sleeve | 0Cr19Ni9 | SUS304 | |
11 | Mechanical seal | 25 | Shoe-shapped flange | HT200 | FC200 | |||
12 | Bracket | HT200 | FC200 | 26 | Attach device | HT200 | FC200 | |
13 | Oil tank cap | HT200 | FC200 | 27 | Divergent pipe | 0Cr19Ni9 | SUS304 | |
14 | Impeller | HT200 | FC200 |
Performance parameters:
Type | Power | Pole | Air capacity-water depth m³/h-m |
Oxygen transfer capacity kgO2/h |
Basin dimension | Workable water depth (m) |
|||
hp | kW | L(m) | W(m) | H(m) | |||||
JA-31-50 | 1 | 0.75 | 4 | 11-2 | 0.35-0.45 | 3 | 2 | 4 | 1-3 |
JA-32-80 | 2 | 1.5 | 4 | 22-3 | 1.0-1.2 | 4 | 3.5 | 4 | 1-3 |
JA-33-80 | 3 | 2.2 | 4 | 37-3 | 1.75-1.95 | 5 | 5 | 4.5 | 1.5-3.5 |
JA-35-100 | 5 | 3.7 | 4 | 75-3 | 3.5-3.95 | 6 | 6 | 5 | 2-4 |
JA-37-100 | 7.5 | 5.5 | 4 | 103-3 | 5.3-5.9 | 7 | 7 | 6 | 2-5 |
Starting equipment:
1. Lifting and hanging the motor with the motor cable is prohibited during the transport and installation processes.
2. Operation waterless is prohibited to prevent mechanical sealing from being damaged.
3