Sewage Treatment Submersible Jet Aeration System Intensive Mixing Easy Installation
Negotiable /Piece
Min.Order:1 Piece
Underwater Jet Water Aeration System Quiet High Efficiency Easy Maintenance
Stainless Steel Submersible Jet Aerators Noise - Free For Waste Water Treatment
Portable Sewage Water Submersible Jet Aerators Low Noise With 4 Pole
Vertical Submersible Jet Aerators , Aeration Tank Sewage Water Pump Aerator
SUS304 Centrifugal Submersible Jet Aerators For Waste Water Treatment 220 Volt
Submersible Jet Pump Aerator Stable Intensive Mixing Easy Installation
Sewage Treatment Submersible Jet Aeration System Intensive Mixing Easy Installation
Features:
1. It has unique design for gas mixture chamber whose intake air quantity is big.
2. Air can be mixed well with water
3. The chamber can produce minute and plenty of air bubble with high air dissolving rate.
4. The pressure produced by impeller through jet hole produces forceful water flow, which realize jet after mixed with air to make oxygen move efficiently in water.
5. It also can achieve good mixing effect.
6. The jet aerator can maintain the flow rate necessary for activated sludge floating.
Structure:
NO, | Name | Material | NO, | Name | Material | |||
GB | JIS | GB | JIS | |||||
1 | Watertight cable | Rubber | 15 | Locked spacer | 0Cr19Ni9 | SUS304 | ||
2 | Sealing equipment of cable | 0Cr19Ni9 | SUS304 | 16 | Impeller nut | 0Cr19Ni9 | SUS304 | |
3 | Flying ring | 17 | Pump casing | HT200 | FC200 | |||
4 | Motor cover | HT200 | FC200 | 18 | Bottom cover | HT200 | FC200 | |
5 | Bearing | 19 | Sealing ring | |||||
6 | O-ring | Rubber | 20 | Strainer | HT200 | FC200 | ||
7 | Rotor | 21 | Air intake pipe | |||||
8 | Stator | 22 | Directing plate | HT200 | FC200 | |||
9 | Motor casing | HT200 | FC200 | 23 | Nozzle holder | HT200 | FC200 | |
10 | Shaft | 2Cr13 | SUS420J1 | 24 | Nozzle sleeve | 0Cr19Ni9 | SUS304 | |
11 | Mechanical seal | 25 | Shoe-shapped flange | HT200 | FC200 | |||
12 | Bracket | HT200 | FC200 | 26 | Attach device | HT200 | FC200 | |
13 | Oil tank cap | HT200 | FC200 | 27 | Divergent pipe | 0Cr19Ni9 | SUS304 | |
14 | Impeller | HT200 | FC200 |
Performance parameters:
Type | Power | Pole | Air capacity-water depth m³/h-m |
Oxygen transfer capacity kgO2/h |
Basin dimension | Workable water depth (m) |
|||
hp | kW | L(m) | W(m) | H(m) | |||||
JA-31-50 | 1 | 0.75 | 4 | 11-2 | 0.35-0.45 | 3 | 2 | 4 | 1-3 |
JA-32-80 | 2 | 1.5 | 4 | 22-3 | 1.0-1.2 | 4 | 3.5 | 4 | 1-3 |
JA-33-80 | 3 | 2.2 | 4 | 37-3 | 1.75-1.95 | 5 | 5 | 4.5 | 1.5-3.5 |
JA-35-100 | 5 | 3.7 | 4 | 75-3 | 3.5-3.95 | 6 | 6 | 5 | 2-4 |
JA-37-100 | 7.5 | 5.5 | 4 | 103-3 | 5.3-5.9 | 7 | 7 | 6 | 2-5 |
Before starting equipment:
1. Lifting and hanging the motor with the motor cable is prohibited during the transport and installation processes.
2. The aerator submerged in the water for a long time shall not be idle after its i