Portable Sewage Water Submersible Jet Aerators Low Noise With 4 Pole
Negotiable /Set
Min.Order:1 Set
Vertical Submersible Jet Aerators , Aeration Tank Sewage Water Pump Aerator
SUS304 Centrifugal Submersible Jet Aerators For Waste Water Treatment 220 Volt
Submersible Jet Pump Aerator Stable Intensive Mixing Easy Installation
Waste Water Treatment Submersible Jet Aerators 220V With Teco Motor
Small Jet Submersible Pump Aerator For Aquaculture High Filtration Rate
Submersible Sewage Water Jet Aeration System Stainless Steel For Aquaculture
Portable Sewage Water Submersible Jet Aerators Low Noise With 4 Pole
Features:
1. The machine unit is designed to run in water with low winding number.
2. The machine unit is designed to run under water with low noise.
3. Overland air intake duct can be additionally equipped with silencer.
4. It is widely used in industrial wastewater treatment, effluent treatment of livestock husbandry and general foul sewer aeration engineering.
5. Aeration tank of effluent facilities of factory applied with activated sludge method.
6. It can be used either individually or in a combined way
Structure:
NO, | Name | Material | NO, | Name | Material | |||
GB | JIS | GB | JIS | |||||
1 | Watertight cable | Rubber | 15 | Locked spacer | 0Cr19Ni9 | SUS304 | ||
2 | Sealing equipment of cable | 0Cr19Ni9 | SUS304 | 16 | Impeller nut | 0Cr19Ni9 | SUS304 | |
3 | Flying ring | 17 | Pump casing | HT200 | FC200 | |||
4 | Motor cover | HT200 | FC200 | 18 | Bottom cover | HT200 | FC200 | |
5 | Bearing | 19 | Sealing ring | |||||
6 | O-ring | Rubber | 20 | Strainer | HT200 | FC200 | ||
7 | Rotor | 21 | Air intake pipe | |||||
8 | Stator | 22 | Directing plate | HT200 | FC200 | |||
9 | Motor casing | HT200 | FC200 | 23 | Nozzle holder | HT200 | FC200 | |
10 | Shaft | 2Cr13 | SUS420J1 | 24 | Nozzle sleeve | 0Cr19Ni9 | SUS304 | |
11 | Mechanical seal | 25 | Shoe-shapped flange | HT200 | FC200 | |||
12 | Bracket | HT200 | FC200 | 26 | Attach device | HT200 | FC200 | |
13 | Oil tank cap | HT200 | FC200 | 27 | Divergent pipe | 0Cr19Ni9 | SUS304 | |
14 | Impeller | HT200 | FC200 |
Performance parameters:
Type | Power | Pole | Air capacity-water depth m³/h-m |
Oxygen transfer capacity kgO2/h |
Basin dimension | Workable water depth (m) |
|||
hp | kW | L(m) | W(m) | H(m) | |||||
JA-31-50 | 1 | 0.75 | 4 | 11-2 | 0.35-0.45 | 3 | 2 | 4 | 1-3 |
JA-32-80 | 2 | 1.5 | 4 | 22-3 | 1.0-1.2 | 4 | 3.5 | 4 | 1-3 |
JA-33-80 | 3 | 2.2 | 4 | 37-3 | 1.75-1.95 | 5 | 5 | 4.5 | 1.5-3.5 |
JA-35-100 | 5 | 3.7 | 4 | 75-3 | 3.5-3.95 | 6 | 6 | 5 | 2-4 |
JA-37-100 | 7.5 | 5.5 | 4 | 103-3 | 5.3-5.9 | 7 | 7 | 6 | 2-5 |
Notice:
1. The protective grade of the motor of JA submerged aerator is IP68, which has a very strict assembly requirement, therefore, it is recommended to have the assembling and maintaining work done after returned to the factory. The following pr