Delivery Time:15 days
Certification:CE,ISO,SPAN,ECA

Hydraulic Submersible Vertical Slurry Pump Heavy Duty For Farm Irrigation
Application:
The based of building drainage equipment and sewer drainage works.
Farm irrigation and pasturage drainage.
Civil and architectural engineering construction.
Cabin ponding and waste water drainage.
 
Features:
1. The application of liquid temperature: 0~40℃
2. Mechanical seal: DN50: 1 mechanical seal (double-end); DN80: 2 mechanical seal (single-end); Material: Silicon.
3. Squirrel-cage, induction motor are F class insulation, motor protection grand is IP68.
4. Excellent semi-open impeller, the impeller will generate vortex flow, which drive and discharge solids through pump flow
channel. Foreigh matters allowance up to 70% of discharge size; able to transfer liquid with modicum air.
 
 
 
Construction:

NO.	Name		Material
			GB	JIS
1	Handle		Q235	SS40
2	Motor cover		HT200	FC200
3	O-ring		NBR	NBR
4	Bearing		-	-
5	Rotor		-	-
6	Shaft		3Cr13	SUS420J2
7	Bearing		-	-
8	Bracket		HT200	FC200
9	Mechanical seal		SiC-SiC	SiC-SiC
10	Impeller		HT200	FC200
11	Pump casing		HT200	FC200
12	Oil cover		HT200	FC200
13	O-ring		NBR	NBR
14	Stator		-	-
15	Motor casing		HT200	FC200
16	Cable		-	-

 
Performance parameters:

Type	Motor					Pump					Weight kg
	kW	hp	Phase	Pole	Fre.	Dia		Head	Capacity
					Hz	mm	in	m	L/min	m³/h
DP51.5-50	1.5	2	3	2	50	50	2‘’	14.3	200	12	28
DP51.5-80	1.5	2	3	2	50	80	3‘’	7.5	500	30	36
DP52.2-80	2.2	3	3	2	50	80	3‘’	11.5	550	33	52
DP53.7-80	3.7	5	3	2	50	80	3‘’	16.7	600	36	60

 
Pump installation:
1. Installation base of pumps ( there is no requirement on the base for the installation of water pump without detachable device)
2. The subsidence and the inclination shall be within the allowable range under the static strength to ensure the normal operation of the water pump.
3. The form, sizes and installation position of the foundation bolt shall be adopted in accordance with the installation drawing. Its minimal depth buried in the concrete shall be determined with the actual stress.
4. The height of the base shall satisfy the structure requirements, i.e. ensure there is concrete protection with sufficient thickness under the bottom of the bolt embedded parts, which shall be thinner as far as possible with a certain thickness (strength guarantee) of the pit bottom.
5. The base shall be arranged with reinforcement steels to prevent fissures caused by temperature and shrink stress, uneven settlement or vibration. The diameter of the reinforcement steels shall be Φ 10 to 16mm and the space 200 to 400mm.
 
 
Workshop: