Portable Submersible Water Aeration System Noise Free Easy Maintenance
Negotiable
Min.Order:1
Sewage Treatment Submersible Jet Aeration System Intensive Mixing Easy Installation
Underwater Jet Water Aeration System Quiet High Efficiency Easy Maintenance
Stainless Steel Submersible Jet Aerators Noise - Free For Waste Water Treatment
Portable Sewage Water Submersible Jet Aerators Low Noise With 4 Pole
Vertical Submersible Jet Aerators , Aeration Tank Sewage Water Pump Aerator
SUS304 Centrifugal Submersible Jet Aerators For Waste Water Treatment 220 Volt
Portable Submersible Water Aeration System Noise Free Easy Maintenance
Features:
1. It has unique design for gas mixture chamber whose intake air quantity is big.
2. Air can be mixed well with water
3. The chamber can produce minute and plenty of air bubble with high air dissolving rate.
4. Cost can be reduced since no other anechoic room is required.
5. There are two types for your selection: equipped with or without automatic attach device.
6. Easy for installation and maintenance, saving operation cost.
Structure:
NO, | Name | Material | NO, | Name | Material | |||
GB | JIS | GB | JIS | |||||
1 | Watertight cable | Rubber | 15 | Locked spacer | 0Cr19Ni9 | SUS304 | ||
2 | Sealing equipment of cable | 0Cr19Ni9 | SUS304 | 16 | Impeller nut | 0Cr19Ni9 | SUS304 | |
3 | Flying ring | 17 | Pump casing | HT200 | FC200 | |||
4 | Motor cover | HT200 | FC200 | 18 | Bottom cover | HT200 | FC200 | |
5 | Bearing | 19 | Sealing ring | |||||
6 | O-ring | Rubber | 20 | Strainer | HT200 | FC200 | ||
7 | Rotor | 21 | Air intake pipe | |||||
8 | Stator | 22 | Directing plate | HT200 | FC200 | |||
9 | Motor casing | HT200 | FC200 | 23 | Nozzle holder | HT200 | FC200 | |
10 | Shaft | 2Cr13 | SUS420J1 | 24 | Nozzle sleeve | 0Cr19Ni9 | SUS304 | |
11 | Mechanical seal | 25 | Shoe-shapped flange | HT200 | FC200 | |||
12 | Bracket | HT200 | FC200 | 26 | Attach device | HT200 | FC200 | |
13 | Oil tank cap | HT200 | FC200 | 27 | Divergent pipe | 0Cr19Ni9 | SUS304 | |
14 | Impeller | HT200 | FC200 |
Performance parameters:
Type | Power | Pole | Air capacity-water depth m³/h-m |
Oxygen transfer capacity kgO2/h |
Basin dimension | Workable water depth (m) |
|||
hp | kW | L(m) | W(m) | H(m) | |||||
JA-31-50 | 1 | 0.75 | 4 | 11-2 | 0.35-0.45 | 3 | 2 | 4 | 1-3 |
JA-32-80 | 2 | 1.5 | 4 | 22-3 | 1.0-1.2 | 4 | 3.5 | 4 | 1-3 |
JA-33-80 | 3 | 2.2 | 4 | 37-3 | 1.75-1.95 | 5 | 5 | 4.5 | 1.5-3.5 |
JA-35-100 | 5 | 3.7 | 4 | 75-3 | 3.5-3.95 | 6 | 6 | 5 | 2-4 |
JA-37-100 | 7.5 | 5.5 | 4 | 103-3 | 5.3-5.9 | 7 | 7 | 6 | 2-5 |
Before starting equipment:
1. Lifting and hanging the motor with the motor cable is prohibited during the transport and installation processes.
2. Submerging the cable socket is prohibited to prevent water from entering into the motor through the cable core, which will lead to reduced insulation or internal short ci