Electric Vertical Air Jet Aerator Submersible Type High Efficiency Oxygen Dissolving
Negotiable /Piece
Min.Order:1 Piece
Portable Submersible Water Aeration System Noise Free Easy Maintenance
Sewage Treatment Submersible Jet Aeration System Intensive Mixing Easy Installation
Underwater Jet Water Aeration System Quiet High Efficiency Easy Maintenance
Stainless Steel Submersible Jet Aerators Noise - Free For Waste Water Treatment
Portable Sewage Water Submersible Jet Aerators Low Noise With 4 Pole
Vertical Submersible Jet Aerators , Aeration Tank Sewage Water Pump Aerator
Electric Vertical Air Jet Aerator Submersible Type High Efficiency Oxygen Dissolving
Features:
1. The pressure produced by impeller through jet hole produces forceful water flow, which realize jet after mixed with air to make oxygen move efficiently in water.
2. It also can achieve good mixing effect.
3. The jet aerator can maintain the flow rate necessary for activated sludge floating.
4. The machine unit is designed to run in water with low winding number.
5. The machine unit is designed to run under water with low noise.
6. Overland air intake duct can be additionally equipped with silencer.
Structure:
NO, | Name | Material | NO, | Name | Material | |||
GB | JIS | GB | JIS | |||||
1 | Watertight cable | Rubber | 15 | Locked spacer | 0Cr19Ni9 | SUS304 | ||
2 | Sealing equipment of cable | 0Cr19Ni9 | SUS304 | 16 | Impeller nut | 0Cr19Ni9 | SUS304 | |
3 | Flying ring | 17 | Pump casing | HT200 | FC200 | |||
4 | Motor cover | HT200 | FC200 | 18 | Bottom cover | HT200 | FC200 | |
5 | Bearing | 19 | Sealing ring | |||||
6 | O-ring | Rubber | 20 | Strainer | HT200 | FC200 | ||
7 | Rotor | 21 | Air intake pipe | |||||
8 | Stator | 22 | Directing plate | HT200 | FC200 | |||
9 | Motor casing | HT200 | FC200 | 23 | Nozzle holder | HT200 | FC200 | |
10 | Shaft | 2Cr13 | SUS420J1 | 24 | Nozzle sleeve | 0Cr19Ni9 | SUS304 | |
11 | Mechanical seal | 25 | Shoe-shapped flange | HT200 | FC200 | |||
12 | Bracket | HT200 | FC200 | 26 | Attach device | HT200 | FC200 | |
13 | Oil tank cap | HT200 | FC200 | 27 | Divergent pipe | 0Cr19Ni9 | SUS304 | |
14 | Impeller | HT200 | FC200 |
Performance parameters:
Type | Power | Pole | Air capacity-water depth m³/h-m |
Oxygen transfer capacity kgO2/h |
Basin dimension | Workable water depth (m) |
|||
hp | kW | L(m) | W(m) | H(m) | |||||
JA-31-50 | 1 | 0.75 | 4 | 11-2 | 0.35-0.45 | 3 | 2 | 4 | 1-3 |
JA-32-80 | 2 | 1.5 | 4 | 22-3 | 1.0-1.2 | 4 | 3.5 | 4 | 1-3 |
JA-33-80 | 3 | 2.2 | 4 | 37-3 | 1.75-1.95 | 5 | 5 | 4.5 | 1.5-3.5 |
JA-35-100 | 5 | 3.7 | 4 | 75-3 | 3.5-3.95 | 6 | 6 | 5 | 2-4 |
JA-37-100 | 7.5 | 5.5 | 4 | 103-3 | 5.3-5.9 | 7 | 7 | 6 | 2-5 |
Installation of JA pump:
1. First mount the attached body on the foundation deck and install the suction pipe and another guide rod properly. Then install the inlet silencer on the upper end of the inlet pipe.
2. Assembly a