Delivery Time:7 working days after received your payment
Certification:CE/CMC/ISO9001

      IP65 IP67 IP68 MTF Battery Operated Flow Meter Explosion Proof Long Life Time
 
 

Introduction:

MTF electromagnetic flow meter, composed of sensor and converter, works based
on Faraday’s law of electromagnetic induction. It is used to measure electrical

conductivity of liquid or solid. Generally, the conductivity should be over 5υS/cm

Application

MTF electromagnetic flow  is used for measuring the flow conductivity liquid,

which is widely used in flow measuring of Metallurgy, Chemical industry,

Paper industry, Environmental protection, Oil industry, Textile industry, Food

industry and City administration, Water works,etc.


Instrument characteristic

1). No baffles and running part inside the measuring tube, therefore no additional flow

loss and no jams happen. Especially for measuring the flow of solid-liquid object, for

example, sewage, mud pulp and CWS (coal water slurry).

2). It can be used in kinds of strong acid and alkali in chemical

solutions.

3). High accuracy, it is up to ±0.2%,it is capable for testing

4). It provides the function of zero correction of sensor and automatic zero adjustment.

5). It has lightning-protection and electricity-protection circuits. The effective,

anti-interference circuits apply to all kinds of bad environment.

Features:

1). It’s the first one to apply “Fuzzy Algorithm” technology to the measurement of

electromagnetic flow meter in China. It has the function of artificial intelligence.

2). It is the first domestic company that has electromagnetic flow meter with HART

communication function .

3). Explosion-proof design accords with the national explosion-proof technology

requirements and has been approved by tests and can be used in various

explosion-proof places.

4). It adopts the international leading excitation technology, which circuit is simple,

stable, and reliable.

5). It has the function of infrared remote control and button operation so as to make

the operation more convenient.

6). It provides the function of zero correction of sensor and automatic zero adjustment.

7). It has multi-language interface to satisfy all the users’ requirements.

8). It has the function of self-adjustment and self-checking.

Selectrion of Ground Ring

If the pipe connecting to the meter is insulated,  the ground ring is needed, generally

metallic or non-metallic grounding rings or grounding electrode (non-metallic) material

is available to adapt to the corrosion of the measured material.

If the measured medium is abrasive, ground ring with neck should be used to protect

lining material of two sides and to prolong its life.

In order to make the reliable operation of the instrument, and to improve measurement

accuracy, free from outside interference of Send potential,the sensor should have separate

ground wire, and the ground ring of both sides of the sensors should be fitted when the

ground resistance, in the pipe connecting to the sensor or non-metallic pipe, is less than 10Ω.

Sensor diameter selection

The selection of the sensor diameter is not the same as the diameter of pipe.This option

applies to the following:

A.for Low flow velocity in the pipe and the stable flow rate, to meet the requirements of the instrumentation on the flow rate range,we should increase the flow rate of partial area and

select the sensor diameter smaller than the pipe diameter ,and install another different -

diameter pipe before the sensor.

B.In terms of the price, for the magnetic flow meter with large diameter, the larger diameter

you want, you higher price you will pay; for the low flow rate in the pipe and stable parameter,

the selection of small diameter would be better. It will not only make the meter work in good condition but also reduce the cost.

Model selection