German technical background VOK®-U-99 water-based wetting and leveling agent

Product introduction

VOK®-U 99 surface modifier can reduce or eliminate film defects, such as scratches, fish eyes and shrinkage holes formed in specific two-component epoxy and alkyd coatings. Meanwhile, VOK®-U 99 can also promote the uniform distribution of the coating on the surface that is difficult to wet and polluted. VOK®-U 99 is a product without AP E and silicone.

Product characteristics

Solid content: 50%

Flash ignition: 122 ° F/50 ℃

Weight per gallon: 8.4 lb

Specific gravity: 1.01

application area 

Waterborne paint and coating

Industrial coatings

Metal protective coating

Ink

Adhesive

Main characteristics

It will not cause interlayer adhesion problems.

Improve the wettability of the substrate.

Reduce surface defects caused by low surface tension additives.

Improve the performance of flow and leveling.

usage method

The product has low viscosity and is easy to add to the coating system.

It is added in any manufacturing stage for color and transparent paint.

Amount added

When VOK®-U 99 When the amount of  added accounts for 0.25-1.0% of the total formula, the ideal effect can be obtained.

Operation and safety

Each product has detailed information on operation and safety. Please refer to the relevant material safety data sheet before using this product. （MSDS)

Storage conditions

It shall be protected from direct sunlight and stored at a temperature of 5 ℃ (40 ° F) to 50 ℃ (130 ° F).

packing

Available in barrels.