German technical background VOK-WT 113 Rheological aids replaces Elementis WT 113
CNY 130 - 150 /Kilogram
Min.Order:25 Kilograms
Guangzhou Situyuan Chemical Co., Ltd
German technical background VOK®-WT 113 water-based rheological additive
Overview: VOK®-WT 113 is a hydrophobic modified alkali swelling acrylic lotion thickener, providing thickening, anti sedimentation, anti dispersion and other effects of water-based system
nature
(This data is only for test reference. If you need detailed product inspection technical indicators, please contact our company.)
Composition: anionic acrylic polymer (HASE)
Appearance: white or pink liquid
Nonvolatile: 29-31%
Solvent: water
Specific gravity: about 1.04
Viscosity: ≤ 20 cp (25 ℃)
PH 3.0-5.0 (stock solution)
application area
Waterborne paint, latex paint, textile paint, water-based adhesive
Characteristics and use
Improve the low and medium shear viscosity. The thixotropy is large
Anti - sagging, anti - pigment sedimentation, effectively avoid or reduce water separation
Good water retention, color matching and compatibility with the system
It can replace the medium molecular weight HEC and improve the film's water resistance, gloss, roll coating splash resistance and microbial erosion resistance
Thickening effect is produced in alkaline environment
It does not contain organic solvents and alkyl phenol polyoxyethylene ether (AP EO), and can be used for the preparation of environment-friendly products
Addition amount and use method
Generally, add 0.1-2.0% to the total amount
VOK®-WT 113 can replace medium molecular weight HEC, and can also be used to improve low shear viscosity. It can be used with other rheological additives to obtain the required rheological properties
VOK®-WT 113 diluted with water (VOK®-WT 113/water=1/1 → 1/5) is added to the system, and fully stirred evenly, and DMAE or MA-95 is used to adjust the PH value of the system to 7.5-10.0
Storage
Keep away from heat and ignition sources
The product shall be placed in a cool and ventilated place, avoiding direct sunlight and freezing to cause holes
The recommended storage environment is 5 ℃ to 40 ℃
If it is not used up after taking it, close the cover to prevent scaling
security
This product should be handled carefully to avoid contact with skin and eyes. For other information, please refer to the Material Safety Data Sheet
packing
Net weight: 25 kg