German technical background VOK®-WT 102 water-based rheological additive

Overview: VO®-WT 102 is an associative polyurethane thickener, providing good thickening and thixotropic properties of water-based systems

nature

(This data is only for test reference. If you need detailed product inspection technical indicators, please contact our company.)

Composition: non-ionic polyurethane polymer

Appearance: yellow to slightly turbid liquid

Non-volatile: 49.5-51.5%

Solvent: ethylene glycol monobutyl ether/water

Specific gravity: about 1.04

Viscosity: 2000-10000 cp (25 ℃)

Characteristics and use

Effectively improve the low shear viscosity, with large thixotropy

It has little influence on the water resistance and gloss of the coating film

Anti-roll coating splash, anti-microbial degradation, insensitive to PH value

Scope of application

Water-based adhesive

Textile coating

Addition amount and use method

Add 0.1-2.0% to the total amount

It can be used with other rheological additives to obtain the required rheological properties

The stock solution has a high viscosity and must be diluted with alcohol ether before use

Dilution method: VOK®-WT 102/cosolvent, 1/1-1/2

Storage

The product shall be stored in a cool and ventilated place, and the container shall be kept tightly away from heat and fire sources

The storage environment is 20 ℃ to 40 ℃

When the temperature is lower than 20 ℃, the appearance may be gelatinous or particles may precipitate. Please heat it to a clear state through water, and mix it evenly before use

Containers containing products shall not be directly exposed to heat radiation

security

This product contains solvent, which should be handled carefully to avoid contact with skin and eyes

For other information, please refer to the Material Safety Data Sheet

packing

Net weight: 25 kg