German technical background VOK®- TSP flow leveling agent

Overview: VOK®- TSP is composed of high boiling point compounds and special interfacial active agents. It can improve the leveling of the coating film and prevent the generation of bubbles and pinholes. It is applicable to all kinds of air-dried and dry-type coatings

nature

Composition: high boiling point solvent with surfactant

Appearance: clarified liquid

Specific gravity: about 0.94

Effective ingredients: 99.99%

Solvent: aromatic hydrocarbon solvent

Refractive index: 1.505-1.515 (25 ℃)

Application field: solvent-based coating

Characteristics and use

It is composed of high boiling point solvent and special interfacial active agent. It has a good effect on improving the solvent volatilization and surface flow properties of paint and ink. It can also prevent the whitening and other defects caused by high humidity

It can control the rate of solvent volatilization on the film surface, improve the fluidity of the film, prevent orange peel, pinhole, crater, etc., and form a flat and high-gloss coating surface

It has good permeability to porous substrates such as wood. When used together with defoamer, it can eliminate the fine bubbles caused by residual bubbles such as conduits and holes in the substrate

It can shorten the standing time of paint baking and spraying, and eliminate the blistering problem caused by the instant high heat of the wet film

It can be added to the dipping and spraying coating to prevent the dent caused by splashing and the boundary mark of the interface. The phenomenon of edge thickening can also be resolved

Addition amount and use method

Add 2.0-5.0% to the total amount. Generally, add 5-10% to the total amount of solvent

The amount added varies according to the coating system

Storage

Place in a cool and ventilated place, keep the container tight, and keep away from heat and fire sources

The storage environment is 0 to 40 ℃

security

This product contains solvent, which should be handled carefully. Avoid contact with skin and eyes. For other information, please refer to the Material Safety Data Sheet