Delivery Time:7 working days after received your payment
Certification:CE/CMC/ISO9001

 
             High Temperature Electromagnetic Flow Meter 

Heat type introduction

Heat type magnetic flow meter is, integrated with flow velocity, heat,

accumulation and display, used to measure the water flow rate and

temperature difference between water supply and drainage by magnetic

sensor and temperature sensor so that to measure and display the water

absorbed or released heat while flowing through the power-consumption

equipments.

Maintenance and repair

a) Sensor installation site should be consistent with the section four

requirements, Please keep the housing clean and tidy;

b)Transmitter should be placed in a clean, ventilated, dry place;

c)Need to inspect every two years, for high precision users, instrument

need to be submitted to censorship.

Meter Characteristic

          1). Easy for installation

          2).High accuracy, it is up to ±0.2%,it is capable for testing

3). It provides the function of zero correction of sensor and automatic zero adjustment.

4). It has multi-language interface to satisfy all the users’ requirements.

5). It has the function of self-adjustment and self-checking.

6). It has lightning-protection and electricity-protection circuits. The effective, 

anti-interference circuits apply to all kinds of bad environment.

MTF Electromagnetic flow meter
	Divided type	Integrated  type(IP67)	Explosion- proof  integrated	Battery powered   type	Heat(energy) type
Accuracy	±0.2%  or ±0.5%
Diameter	DN15~dn2400		DN15~DN600		DN25~DN1400
Flange	Comply with GB9119 Standard carbon steel(stainless steel is optional)
Pressure	DN15~DN1600 1.0, 1.6,2.5,4.0MPa  DN700~DN2400 0.6, 1.0,1.6MPa		DN15~DN600 1.0, 1.6,2.5,4.0MPa		DN15~DN600 1.0,1.6,2.5, 4.0MPa DN700~DN2400 0.6, 1.0,1.6MPa
	Please consult us if you need special pressure
Liner	PTFE,PU,CR,PFA,F46,IR
Conductivity	≥5μs/cm(Please consult us if it is less than ≥5μs/cm)
Electrode	316L,Hastelloy,Ti,Ta,PT-It
Protection Level	IP67(For sensor,  IP28 is  optional)	IP67	IP67	IP68	IP67  IP68
Medium Temperature	-25℃~180℃ (Please  refer to liner  material)	-25℃~80℃(Please  refer  to liner material)			-25℃~180℃ (Please refer to  liner material)
Influence of Ambient  temperature	-25℃~60℃<±0.1%/10℃ or<±0.25%/10℃
Repetition	≤±0.1%,±0.25%
Analog output Error	≤±0.02mA
Current	≤20m/s
Electrical connection	M20*1.5seal,G1/2,NPT1/2
Output interface	Standard output(4~20mA),Pulse output,RS485,HART,Profibus-PA