Name: 6318 Open Radial Ball Bearing 110*200*38mm Single Row SUNBEARING
Brand: SUNBEARING
Availability: InStock

Product Details

6318 Open Radial Ball Bearing 110*200*38mm Single Row SUNBEARING

Bore diameter:	90 mm	Limiting speed	4900 1/min
Outside diameter:	190 mm	Reference speed	5100 1/min
Overall width:	43 mm	Calculation factor (f0)	13,9
Rows of Balls	Single	Bore	C - Cylindrical Bore
Outer ring type:	Unsplit	Cage Type	S - Steel or Standard Cage
Internal clearance:	CN(Standard)	Heat Stabilization	No Heat Stabilization - Temperatures up to 120°C
Closure type:	Open	Weight:	5.43kgs
Basic dynamic load rating, radial	142000 N	da min	104 mm
Basic static load rating, radial	102000 N	Da max	176 mm
Fatigue limit load, radial	5900 N	ra max	2,5 mm

6318 Bearing Short Description

The 6318/C3VL0241 is an electrically insulated deep groove ball bearing (INSOCOAT ball bearing). A special coating on the outer ring (VL0241) protects against bearing damage and eventual failure due to the passage of electric current.

The 6318/C3VL0241 has an inner dimension or bore (d) of 90mm, an outer dimension (D) of 190mm, and a width or thickness (B) of 43mm. The 6318/C3VL0241 is open on both sides (it has no seals), has a brass cage, and an internal play greater than Normal.

6318 Ball Bearing Suffix

VL0241: External surfaces of the outer ring coated with aluminum oxide. The coating is sealed with a resin to protect against the conductive effects of water and moisture. This basic coating can withstand voltages up to 1.000 V DC.
C3: Internal clearance greater than Normal. The extra internal clearance allows expansion due to high speeds or temperatures.

6318 Bearing Application

Open deep groove ball bearings are suitable for high-speed or even extremely high-speed operation, and are very durable and do not require frequent maintenance. This type of bearing has a low friction coefficient, high limit speed, and various size ranges and forms. It is used in precision instruments, low-noise motors, automobiles, motorcycles, and general machinery industries. It is the most widely used type of bearing in the machinery industry. Mainly bear radial load, but also can bear a certain amount of axial load.