S7205 CD/HCP4A Angular Contact Ball Bearing 25*52*15mm Stainless Steel SUNBEARINGProduct Specification

Bore diameter:	25 mm	Basic dynamic load rating	13.5 kN
Outside diameter:	52 mm	Basic static load rating	7.2 kN
Overall width:	15 mm	Fatigue load limit	0.224 kN
Rows of Balls	Single	Attainable speed for grease lubrication	38000 r/min
Outer ring type:	Unsplit	Number of balls	13
Radial clearance class	C3	Mass	0.12 kg
Closure type:	Open	Preload class A	50 N
Material	Stainless Steel	Static axial stiffness, preload class A	32 N/µm
Contact angle	15 °	Preload class B	100 N
Ball diameter	7.938 mm	Static axial stiffness, preload class B	42 N/µm

S7205 Bearing Short Description

S7205 Stainless Steel Single Row Angular Contact Ball Bearing

Angular contact ball bearings are designed to accommodate combined loads - basically simultaneously acting radial and axial loads.

In particular, single row angular contact bearings can accommodate axial loads acting in one direction only and are of non-separable design.

S7205 Angular Contact Ball Bearing Features

S7205 bearing can bear radial load and axial load at the same time.

It can work at higher speeds.

High precision and high speed bearing with 15-degree contact angle

Angular contact ball bearings have raceways on the inner and outer rings, and the inner and outer rings can be relatively displaced along the bearing axis.

This type of bearing is particularly suitable for bearing compound loads, that is, loads that act simultaneously in the radial and axial directions.

Angular Contact Ball Bearing Application

Single row angular contact ball bearings: machine tool spindles, high-frequency motors, gas turbines, centrifugal separators, small car front wheels, differential pinion shafts, booster pumps, drilling platforms, food machinery, indexing heads, repair welders, Low-noise cooling tower, electromechanical equipment, painting equipment, machine tool slot plate, arc welding machine.