S6000-2RS Stainless Steel Deep Groove Ball Bearing 10*26*8mm SUNBEARINGProduct Specification

Bore diameter:	10 mm	Limiting speed	18400  1/min
Outside diameter:	26 mm	Basic dynamic load rating, radial	3890  N
Overall width:	8 mm	Basic static load rating, radial	1570  N
Rows of Balls	Single	Mass	0.02 kg (approx.)
Outer ring type:	Unsplit	Bore Tolerance	+0/-0.008mm
Internal clearance:	CN(Standard)	Seal Material	Nitrile Rubber
Closure type:	2RS	Bearing Material	440C Stainless Steel
Ring Material:	Stainless Steel	Da max	24  mm
Operating Temperature Range	-14 Degrees to 212 Degrees F	da min	12  mm
Bearing Number	S6000	ra max	0,3  mm

S6000 Bearing Short Description

S6000 bearing uses stainless steel material that can resist corrosion caused by moisture and other media. Provide closed (with seal or dust cover) or open design. Open bearings can also be equipped with seals or dust caps, and there are generally grooves on the side of the inner ring.

The load-carrying capacity of these bearings is lower than that of high chromium steel bearings of the same size

S6000 Deep Groove Ball Bearing Features

Compared with ordinary bearings, stainless steel ball bearings not only have obvious advantages in material but also in terms of technology and precision control, they are much stricter than ordinary bearings. During the working process, the stainless steel bearing works stably, with low noise, corrosion resistance, and wide application.

Compared with ordinary bearing steel, stainless steel bearings have stronger anti-rust and anti-corrosion properties. Choose suitable lubricants, dust caps, etc., and can be used in an environment of -60℃~+300℃. Stainless steel deep groove ball bearings can resist corrosion caused by moisture and several other media. This type of single-row deep groove ball bearing is the same as the standard deep groove ball bearing made of carbon chromium (rolling bearing) steel. It has a deep bearing raceway groove and a high degree of fit between the bearing raceway and the ball.

S6000 Bearing Application

Stainless steel bearings are widely used in food processing, medical equipment, and pharmaceutical machinery due to their high mechanical strength and large load capacity.