Name: UCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARING
Brand: SUNBEARING
Availability: InStock

Product Details

UCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARING

Product Name	Pillow Block Bearing UCF213
Structure	Pillow block Bearing	Limiting speed Bearing with shaft tolerance h6	2350 r/min
Bore Size	65 mm	Housing material	Cast iron
Width Radial Insert Bearing To The Slot e (mm):	187 mm	Set screw	M10x1
Width Radial Insert Bearing a (mm):	69.7 mm	Hexagonal key size for set screw	5 mm
Designation, housing	F213	Recommended tightening torque for set screw	16.5 N·m
The Designation, Radial Insert Ball Bearing	UC213	Recommended diameter for attachment bolts, mm	16 mm
Bearing Type	Extended inner race with set screws	Recommended diameter for attachment bolts, inch	0.625 in
A	50 mm	T min.	-20 °C
Product weight:	5.35 kg	T max.	100 °C
Material	Cast iron housing, chrome steel bearing	s1	32.55 mm
Dynamic Load Rating (Cr)	57.2 kN	S	25.4 mm
Static Load Rating (Cor)	40 kN	R_G	19.700 mm
Fatigue load limit	1.7 kN	R₁	34.5 mm

UCF213 Bearing Features

UCF or SF Series 4 Bolt Square Cast Iron Housings: Bearing units supplied with a fully sealed bearing insert fitted in the cast iron housing and includes a grease nipple to facilitate re-lubrication. The bearing insert has 2 grub screws to allow tightening against the shaft once fitted. The inserts (available separately) can be removed from the housings for future replacement as required

Benefits: Cost-effective bearing/housing assembly, re-lubricate, replaceable insert, grub screw fixing

Pillow Block Bearing

Pillow block bearing consists of an outer spherical ball bearing with seals on both sides and a cast (or stamped steel plate) bearing seat.

The internal structure of a seated outer spherical ball bearing is the same as that of a deep groove ball bearing, but the inner ring of this type of bearing is wider than the outer ring. The outer ring has a truncated spherical outer surface, which can automatically adjust the center when matched with the concave spherical surface of the bearing seat. Usually, there is a gap between the inner hole of this kind of bearing and the shaft, and the inner ring of the bearing is fixed on the shaft with a jack wire, an eccentric sleeve, or an adapter sleeve, and rotates with the shaft.

The bearing with seat has compact structure, convenient installation, and unloading, perfect sealing, suitable for simple support, and is often used in mining, metallurgy, agriculture, chemical industry, textile, printing, and dyeing, conveying machinery, etc.