Name: UCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARING
Brand: SUNBEARING
Availability: InStock

Product Details

UCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARING

Product Name	Pillow Block Bearing UCFL206
Structure	Pillow block Bearing	Locking Device	Set Screw
d	30 mm	Seal Type	Contact
L	80 mm	Set screw	M6x0.75
H	148 mm	Hexagonal key size for set screw	3 mm
Designation, housing	FL206	Recommended tightening torque for set screw	4 N·m
The Designation, Radial Insert Ball Bearing	UC206	Recommended diameter for attachment bolts, mm	14 mm
Sealing solution	Standard seals with additional flingers	Total height unit	40.2 mm
A	30 mm	T min.	-20 °C
Product weight:	0.9 kg	T max.	100 °C
Housing Material	Cast Iron	Mounting Hole Center-to-Center (e)	117 mm
Dynamic Load Rating (Cr)	19.5 kN	S	15.9 mm
Static Load Rating (Cor)	11.2 kN	Mounting Slot Width (S1)	19.05 mm
Lubrication	Non-Relubricatable	N	16 mm

UCFL206 Bearing Features

UCFL206 bearing is composed of a ball bearing and a diamond-shaped bearing housing. It can be installed on the vertical side of the machine.
Compared with the square bearing housing, diamond-shaped pillow block bearing has less installation space, component quality has also decreased.
2 mounting bolt holes center distance of diamond-shaped bearing housing is the same as the square bearing housing’ So they are interchangeable with each other.
When Install the bearing housing on the main body of the machine you must use both 2 bolts.
Main application: Roller conveyor, Machines with small installation interval, etc.

UCFL206 Pillow Block Bearing Cleaning and InspectionCleaning

When removing the bearing for inspection, first take pictures and other methods to make appearance records. In addition, confess the amount of remaining lubricant and sample the lubricant before cleaning the bearing.

Inspection

In order to distinguish whether the removed bearing can be used from scratch, it is important to check its standard accuracy, rotation accuracy, internal clearance, and wear of the cooperation surface, raceway surface, holding frame, and sealing ring. The inspection effect can be distinguished and judged by a conventional bearing or a reasonable user who knows the bearing. In addition, the importance of the mechanical function and related factors can be different, so the inspection cycle and detection parameters are also different. If there is any damage above, it can not meet the requirements of re-use, the bearing should not be used from the beginning, it is necessary to replace it.