6214 Deep Groove Ball Bearing 70*125*24mm SUNBEARINGProduct Specification

Bore diameter:	70 mm	Basic dynamic load rating	63.7 kN
Outside diameter:	125 mm	Basic static load rating	45 kN
Overall width:	24 mm	Fatigue load limit	1.9 kN
Rows of Balls	Single	Reference speed	11000 r/min
Outer ring type:	Unsplit	Limiting speed	7000 r/min
Radial clearance class	CN (Standard)	Mass	1.09 kg
Closure type:	ZZ	r1,2	min. 1.5 mm
Material	Chrome Steel	da	min. 79 mm
Cage Material	Sheet Steel	Da	max. 116 mm
Calculation factor	14,4	ra	max. 1.5 mm

6214 Bearing Short Description

6214 deep groove ball bearings are one of the most common styles of ball bearings which support axial forces in both directions as well as radial forces.

Radial ball bearings are composed of an inner ring and an outer ring, plus a cage with a precision ball set.
Ball-bearing is one of the most common and used. It can support thrust and radial loads. Its speed of rotation is superior to other types of bearings.

Bearings facilitate the movement between a shaft and the parts attached to it. There is a lot of types depending on different aspects such as loads, accuracy, rolling elements, or speed.

Why Choose 6214 Bearing?

This type of ball bearing is often the most popular because of its versatility. They are ideal for high speeds and can handle a good radial load capacity, all will very little maintenance required.
“Deep Groove” refers to the race (the groove where the balls rest). There is therefore a larger space between the inner and outer rings, than the diameter of the ball. This leaves space for the rubber seals.

Why choose a steel ball bearing?

Steel is the perfect material for ball bearings as it provides strength and reliability whilst being corrosion-resistant. Steel ball bearings are suitable for installing as they require very little maintenance and are designed to last.