Specifications

800W Single Output Switching Power Supply
AC-DC Power Supply
Input:110 / 220VAC selected by switch
Output:12V,15V,24V,48V

800W Single Output Switching Power Supply

AC input range selected by switch
Protections: Short circuit/ Over voltage/Over load/ Over temp.
High reliability/ Low ripple noise
Built-in remote sense function
Built-in remote ON-OFF control
With parallel function
Can adjust from 20~100% output voltage by external control 1-5V
Forced air cooling by built-in DC fan
Case coating with paint

 

MODEL	SCN-800-12	SCN-800-15	SCN-800-24	SCN-800-48
OUTPUT	DC VOLTAGE	12V	15V	24V	48V
RATED CURRENT	66A	54A	33A	16.6A
CURRENT RANGE	0 ~ 66A	0 ~ 54A	0 ~ 33A	0 ~ 16.6A
RATED POWER	800W	800W	800W	800W
RIPPLE & NOISE (max.) Note.2	150mVp-p	150mVp-p	240mVp-p	480mVp-p
VOLTAGE TOLERANCE Note.3	±1.0%	±1.0%	±1.0%	±1.0%
LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%
LOAD REGULATION	±0.5%	±0.5%	±0.5%	±0.5%
SETUP, RISE, HOLD TIME	800ms, 50ms, 16ms at full load
INPUT	VOLTAGE RANGE	90 ~ 130VAC / 180~260VAC selected by switch, 260~370VDC
FREQUENCY RANGE	47 ~ 63Hz
EFFICIENCY (Typ.)	77%	80%	81%	82%
AC CURRENT	11A / 115VAC 7.0A / 230VAC
INRUSH CURRENT (max.)	60A / 230VAC
LEAKAGE CURRENT	3.5mA / 240VAC
PROTECTION	OVERLOAD	110~135% rated output power
Protection type: Current limiting, delay shut down o/p voltage, re-power on to recover.
OVER VOLTAGE	110~135% follow to output set up point
Protection type: Shut down o/p voltage, re-power on to recover.
OVER TEMPERATURE	>100ºC / measure by heat sink, near transformer
Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.,HUMIDITY	-10 ~ +65ºC (Refer to output load derating curve), 20 ~ 90% RH
STORAGE TEMP., HUMIDITY	-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT	±0.04%/ºC (0 ~ 50ºC)
VIBRATION	10 ~ 200Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	Design refer to UL1950, CSA22.2, IEC60950
EMI CONDUCTION & RADIATION	Design refer to FCC part 15 class A
WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
OTHERS	MTBF	120khrs min. MIL-HDBK-217F (25ºC)
DIMENSION	291*132*68mm (L*W*H)
PACKING	2.3kg; 8pcs/ 24kg/ CARTON
NOTE	1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.