Specifications

240W Industrial DIN-Rail Power Supply(switching power supply)
Input:110~ 220VAC Full range
Output:24V,48V

240W Industrial DIN-Rail Power Supply(switching power supply)

Features:
Universal AC input / Full range
Built in active PFC function
Protections: Short circuit/Over load/Over voltage/Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at 100KHz

MODEL	DRP-240-24	DRP-240-48
OUTPUT	DC VOLTAGE	24V	48V
RATED CURRENT	10A	5A
CURRENT RANGE	0 ~ 10A	0 ~ 5A
RATED POWER	240W	240W
RIPPLE & NOISE (max.) Note.2	80mVp-p	150mVp-p
VOLTAGE ADJ. RANGE	24 ~ 28V	48 ~ 53V
VOLTAGE TOLERANCE Note.3	±1.0%	±1.0%
LINE REGULATION	±0.5%	±0.5%
LOAD REGULATION	±1.0%	±1.0%
SETUP, RISE TIME	800ms,40ms/230VAC   800ms, 40ms/115VAC    at full load
HOLD TIME(Typ.)	24ms/230VAC      24ms/115VAC  at full load
INPUT	VOLTAGE RANGE  Note.5	85 ~ 264VAC          120 ~ 370VDC
FREQUENCY RANGE	47 ~ 63Hz
POWER FACTOR (Typ.)	0.96/230VAC          0.99/115VAC at full load
EFFICIENCY (Typ.)	84%	85%
AC CURRENT	2.8A/115VAC     1.4A/230VAC
INRUSH CURRENT(max.)	COLD START 27A/115VAC 45A/230VAC
LEAKAGE CURRENT	<3.5mA/240VAC
PROTECTION	OVERLOAD	105 ~ 150% rated output power
Protection type: Constant current limiting,recovers automatically after fault condition is removed
OVER VOLTAGE	30 ~ 36V	54 ~ 60V
Protection type: Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE	100ºC±5ºC (TSW1) Detect on heat sink of power transistor
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-10 ~ +70ºC (Refer to output load derating curve)
WORKING HUMIDITY	20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY	-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT	±0.03%/ºC (0 ~ 50ºC)
VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note.4)	SAFETY STANDARDS	Design refer to UL508, UL60950-1, TUV EN60950-1
WITHSTAND VOLTAGE	I/P-O/P:3KVAC     I/P-FG:1.5KVAC     O/P-FG:0.5KVAC
ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION	Compliance to EN55011,EN55022 (CISPR22) Class B
HARMONIC CURRENT	Compliance to EN61000-3-2,-3
EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A
OTHERS	MTBF	136.8K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION	125.5*125.2*100mm (L*W*H)
PACKING	1.2Kg; 12pcs/15.5Kg/1.2CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5.Derating may be needed under lpw input voltages.Please check the derating curve for more details.