Specifications

200W Single Output Switching Power Supply
DC Power Supply
Input:110 / 220VAC selected by switch
Output:5V,12V,24V,27V

200W Single Output Switching Power Supply

AC input range selected by switch
Protections: Short circuit/Over load
Forced air cooling by built-in DC ball bearing fan
LED indicator for power on
Fixed switching frequency at 25KHz 

 

MODEL	S-200-5	S-200-12	S-200-15	S-200-24	S-200-27
OUTPUT	DC VOLTAGE	5V	12V	15V	24V	27V
RATED CURRENT	40A	16.5A	13.3A	8.5A	7.4A
CURRENT RANGE	0 ~ 40A	0 ~ 16.5A	0 ~ 13.3A	0 ~ 8.5A	0 ~ 7.4A
RATED POWER	200W	200W	200W	204W	200W
RIPPLE & NOISE (max.) Note.2	180mVp-p	120mVp-p	120mVp-p	120mVp-p	150mVp-p
VOLTAGE ADJ. RANGE	4.75 ~ 5.5V	10.8 ~ 13.2V	13.5 ~ 16.5V	21.6 ~ 26.4V	26 ~ 32V
VOLTAGE TOLERANCE Note.3	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%
LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
LOAD REGULATION	±1.0%	±0.5%	±0.5%	±0.5%	±0.5%
SETUP, RISE, HOLD TIME	200ms, 80ms, 16ms at full load
INPUT	VOLTAGE RANGE	85 ~ 132VAC / 176 ~ 264VAC by switch 248 ~ 370VDC
FREQUENCY RANGE	47 ~ 63Hz
EFFICIENCY (Typ.)	75%	80%	80%	82%	82%
AC CURRENT	4.2A/115VAC 2.3A/230VAC
INRUSH CURRENT (max.)	COLD START 30A/115VAC 60A/230VAC
LEAKAGE CURRENT	<2mA / 240VAC
PROTECTION	OVERLOAD	110 ~ 160%	105 ~ 150% rated output power
Protection type: Shut down o/p voltage, re-power on to recover.
ENVIRONMENT	WORKING TEMP.	-10 ~ +60ºC (Refer to output load derating curve)
WORKING HUMIDITY	20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY	-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT	±0.03%/ºC (0 ~ 50ºC)
VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	Design refer to UL1012
WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION	Design refer to FCC Part15J Conduction Class A
OTHERS	MTBF	301.1K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION	150*140*86mm (L*W*H)
PACKING	1.09Kg; 12pcs/14.65Kg/0.0326CMB
NOTE	1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation.