Specifications

120W Quad Output Switching Power Supply
Input:110 / 220VAC selected by switch
Output:5/12/-5/-12V,5/15/-5/-15V
5/12/24/-12V

120W Quad Output Switching Power Supply

Protections: Short circuit/Over load/Over voltage
100% full load burn-in test
Fixed switching frequency at 25KHz

 

MODEL	Q-120B	Q-120C	Q-120D
OUTPUT	DC VOLTAGE	5V	12V	-5V	-12V	5V	15V	-5V	-15V	5V	12V	24V	-12V
RATED CURRENT	11A	4A	1A	1A	10A	3.5A	1A	1A	8A	2A	2A	1A
CURRENT RANGE	2 ~ 12A	0.5 ~ 5A	0.2 ~ 1A	0.2 ~ 1A	2 ~ 12A	0.5 ~ 5A	0.2 ~ 1A	0.2 ~ 1A	2 ~ 12A	0.2 ~ 5A	0.2 ~ 2A	0.2 ~ 1A
RATED POWER	120W				122.5W				124W
RIPPLE & NOISE (max.) Note.2	80mVp-p	120mVp-p	80mVp-p	120mVp-p	80mVp-p	150mVp-p	80mVp-p	150mVp-p	80mVp-p	120mVp-p	180mVp-p	120mVp-p
VOLTAGE ADJ. RANGE	CH1: 4.75 ~ 5.5
VOLTAGE TOLERANCE Note.3	±2.0%	±6.0%	±6.0%	±6.0%	±2.0%	+10,-5%	±6.0%	+10,-5%	±2.0%	±6.0%	±6.0%	±6.0%
LINE REGULATION	±0.5%	±1.0%	±1.0%	±1.0%	±0.5%	±1.0%	±1.0%	±1.0%	±0.5%	±1.0%	±1.0%	±1.0%
LOAD REGULATION	±0.5%	±5.0%	±5.0%	±5.0%	±0.5%	±6.0%	±5.0%	±6.0%	±0.5%	±5.0%	±5.0%	±5.0%
SETUP, RISE, HOLD TIME	200ms, 50ms, 20ms at full load
INPUT	VOLTAGE RANGE	88 ~ 132VAC/176 ~ 264VAC selected by switch          240 ~ 370VDC
FREQUENCY RANGE	47 ~ 63Hz
EFFICIENCY (Typ.)	77%				76%				80%
AC CURRENT	2.8A/115VAC 1.6A/230VAC
INRUSH CURRENT (max.)	COLD START 35A
LEAKAGE CURRENT	<3.5mA / 240VAC
PROTECTION	OVERLOAD	105~135% rated output power
Protection type: Shut down o/p voltage, re-power on to recover.
OVER VOLTAGE	CH1:5.75 ~ 6.75VDC
Protection type: Shut down o/p voltage, re-power on to recover.
ENVIRONMENT	WORKING TEMP.	-10~+60ºC (Refer to output load derating curve)
WORKING HUMIDITY	20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY	-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT	±0.03%/ºC (0 ~ 50ºC)
VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note.4)	SAFETY STANDARDS	Design refer to UL1950, TUV EN60950
WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
HARMONIC CURRENT	Compliance to EN61000-3-2,-3, Class A
EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, Light industry level, criteria A
EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
OTHERS	MTBF	261.4K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION	199*110*50mm (L*W*H)
PACKING	0.81Kg; 16pcs/14.51Kg/0.0287CMB
NOTE	1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.