Specifications

100W Dual Output Switching Power Supply
SMPS
Input:110 / 220VAC selected by switch
Output:5V/12V,5V/24V

100W Dual Output Switching Power Supply

AC input range selected by switch
Protections: Short circuit/Over load
Cooling by free air convection
LED indicator for power on
Fixed switching frequency at 23KHz

MODEL	D-100A	D-100B
OUTPUT	DC VOLTAGE	5V	12V	5V	24V
RATED CURRENT	15A	2A	15A	1A
CURRENT RANGE	1 ~ 15A	0.3 ~ 2A	1 ~ 15A	0.2 ~ 1A
RATED POWER	98W		99W
RIPPLE & NOISE (max.) Note.2	100mVp-p	100mVp-p	100mVp-p	100mVp-p
VOLTAGE ADJ. RANGE	CH1:4.75 ~ 5.5V
VOLTAGE TOLERANCE Note.3	±2.0%	±6.0%	±2.0%	±7.0%
LINE REGULATION	±0.5%	±1.0%	±0.5%	±1.0%
LOAD REGULATION	±0.5%	±5.0%	±0.5%	±6.0%
SETUP, RISE, HOLD TIME	200ms,50ms, 20ms at full load
INPUT	VOLTAGE RANGE	88 ~ 132VAC/176 ~ 264VAC selected by switch 248 ~ 370VDC
FREQUENCY RANGE	47 ~ 63Hz
EFFICIENCY (Typ.)	78%		80%
AC CURRENT	2.8A/115VAC 1.6A/230VAC
INRUSH CURRENT (max.)	COLD START 35A
LEAKAGE CURRENT	<3.5mA / 240VAC
PROTECTION	OVERLOAD	105 ~ 135% rated output power.
Protection type: Shut down o/p voltage, re-power on to recover.
OVER VOLTAGE	CH1:5.75 ~ 6.75VDC
Protection type: Shut down o/p voltage, re-power on to recover.
ENVIRONMENT	WORKING TEMP.	-10 ~ +60ºC (Refer to output load derating curve)
WORKING HUMIDITY	20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY	-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT	±0.03%/ºC (0 ~ 50ºC) on +5V output
VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note.4)	SAFETY STANDARDS	Design refer to UL1950, TUV EN60950-1
WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT	Compliance to EN61000-3-2,-3
EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
OTHERS	MTBF	272.8K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION	199*110*50mm (L*W*H)
PACKING	0.758Kg; 16pcs/13.76Kg/0.0287CMB
NOTE	1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.