800W Single Output Switching Power Supply
Negotiable /Piece
Min.Order:10 Pieces
Yueqing Ledisen Imp. & Exp. Co., Ltd.
800W Single Output Switching Power Supply
AC input range selected by switch
Protections: Short circuit/ Over voltage/Over load/ Over temp.
High reliability/ Low ripple noise
Built-in remote sense function
Built-in remote ON-OFF control
With parallel function
Can adjust from 20~100% output voltage by external control 1-5V
Forced air cooling by built-in DC fan
Case coating with paint
MODEL | SCN-800-12 | SCN-800-15 | SCN-800-24 | SCN-800-48 | |
---|---|---|---|---|---|
OUTPUT | DC VOLTAGE | 12V | 15V | 24V | 48V |
RATED CURRENT | 66A | 54A | 33A | 16.6A | |
CURRENT RANGE | 0 ~ 66A | 0 ~ 54A | 0 ~ 33A | 0 ~ 16.6A | |
RATED POWER | 800W | 800W | 800W | 800W | |
RIPPLE & NOISE (max.) Note.2 | 150mVp-p | 150mVp-p | 240mVp-p | 480mVp-p | |
VOLTAGE TOLERANCE Note.3 | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
LOAD REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
SETUP, RISE, HOLD TIME | 800ms, 50ms, 16ms at full load | ||||
INPUT | VOLTAGE RANGE | 90 ~ 130VAC / 180~260VAC selected by switch, 260~370VDC | |||
FREQUENCY RANGE | 47 ~ 63Hz | ||||
EFFICIENCY (Typ.) | 77% | 80% | 81% | 82% | |
AC CURRENT | 11A / 115VAC 7.0A / 230VAC | ||||
INRUSH CURRENT (max.) | 60A / 230VAC | ||||
LEAKAGE CURRENT | 3.5mA / 240VAC | ||||
PROTECTION | OVERLOAD | 110~135% rated output power | |||
Protection type: Current limiting, delay shut down o/p voltage, re-power on to recover. | |||||
OVER VOLTAGE | 110~135% follow to output set up point | ||||
Protection type: Shut down o/p voltage, re-power on to recover. | |||||
OVER TEMPERATURE | >100ºC / measure by heat sink, near transformer | ||||
Protection type: Shut down o/p voltage, re-power on to recover | |||||
ENVIRONMENT | WORKING TEMP.,HUMIDITY | -10 ~ +65ºC (Refer to output load derating curve), 20 ~ 90% RH | |||
STORAGE TEMP., HUMIDITY | -20 ~ +85ºC, 10 ~ 95% RH | ||||
TEMP. COEFFICIENT | ±0.04%/ºC (0 ~ 50ºC) | ||||
VIBRATION | 10 ~ 200Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | ||||
SAFETY & EMC | SAFETY STANDARDS | Design refer to UL1950, CSA22.2, IEC60950 | |||
EMI CONDUCTION & RADIATION | Design refer to FCC part 15 class A | ||||
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||||
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | ||||
OTHERS | MTBF | 120khrs min. MIL-HDBK-217F (25ºC) | |||
DIMENSION | 291*132*68mm (L*W*H) | ||||
PACKING | 2.3kg; 8pcs/ 24kg/ CARTON | ||||
NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |