STM32F429IIT6 SCM ST original stock
Negotiable /Piece
Min.Order:1 Piece
Shenzhen nanbeihang Electronic Development Co., Ltd
characteristic
• Core: ARM with FPU ® 32-bit Cortex ®- M4
CPU, realizing zero wait state operation in Flash memory
Adaptive real-time accelerator for performance (ART accelerator ™)、
The main frequency is up to 180MHz, and MPU can achieve up to
225DMIPS/1.25DMIPS/MHz (Dhrystone 2.1)
With DSP instruction set.
• Memory
– Up to 2 MB Flash, organized into two zones, read/write synchronization
– Up to 256+4 KB SRAM, including 64 KB CCM
(Kernel coupled memory) Data RAM
– Flexible external storage control with up to 32-bit data bus
Devices: SRAM, PSRAM, SDRAM/LPSDR
SDRAM, Compact Flash/NOR/NAND memory
• LCD parallel interface, compatible with 8080/6800 mode
• The LCD-TFT controller has a resolution up to XGA, and has a special
Chrome ART Accelerator used ™, Graph for enhancement
Shape Content Creation (DMA2D)
• Clock, reset and power management
– 1.7 V to 3.6 V power supply and I/O
– POR, PDR, PVD and BOR
– 4 to 26 MHz crystal oscillator
– Built in factory calibrated 16 MHz RC oscillator
(1% accuracy)
– 32 kHz RTC oscillator with calibration
– Built in 32 kHz RC oscillator with calibration
• Low power consumption
– Sleep, shutdown and standby modes
– VBAT can be RTC, 20 × 32-bit backup register+optional
4 KB backup SRAM power supply for
• Three 12 bit, 2.4 MSPS ADC: up to 24 channels, triple
Up to 7.2 MSPS in cross mode
• 2 x 12 bit D/A converters
• General DMA: 16 channel DMA control with FIFO and burst support
Brake
• Up to 17 timers: 12 16 bit timers, and 2 frequencies
Up to 180 MHz 32-bit timer, each timer
With 4 input capture/output comparison/PWM, or pulse meter
Counter and quadrature (incremental) encoder input
• Commissioning mode
– SWD&JTAG interface
– Cortex-M4 tracking macro cell ™
• Up to 168 interrupt capable I/O ports
– Up to 164 fast I/Os, up to 90 MHz
– Up to 166 I/Os that can withstand 5 V
• Up to 21 communication interfaces
– Up to 3 I2C interfaces (SMBus/PMBus)
– Up to 4 USART/4 UART (11.25 Mbit/s
ISO7816 interface, LIN, IrDA, modem control)
– Up to 6 SPIs (45 Mbits/s), 2 with multiplexing
Full Duplex I for
2S, via internal audio PLL or external clock
Achieve audio level accuracy
– 1 SAI (Serial Audio Interface)
– 2 CAN (2.0B active) and SDIO interfaces
• Advanced connectivity
– USB 2.0 full speed device/host/OTG with on-chip PHY
controller
– With dedicated DMA, on-chip full speed PHY and ULPI
USB 2.0 high-speed/full speed device/host/OTG controller
– 10/100 Ethernet MAC with dedicated DMA: Supported
IEEE 1588v2 Hardware, MII/RMII
• 8-14 bit parallel camera interface: speed up to 54MB/s
• True random number generator
• CRC computing unit
• RTC: Sub second precision, hardware calendar
• 96 digit unique ID
explain
STM32F427xx and STM32F429xx devices are based on high-performance ARM ® Cortex ®- M4 32-bit RISC kernel
Operating frequency up to 180 MHz. Cortex-M4 core with single precision floating point unit (FPU), supporting all ARM ® single
Precision data processing instructions and data types. It also has a set of DSP instructions and a memory protection to improve application security
Unit (MPU).
STM32F427xx and STM32F429xx devices integrate high-speed embedded memory (Flash memory and SRAM capacity
Up to 2M bytes and 256K bytes respectively) and up to 4K bytes of backup SRAM, as well as a large number of SRAM connected to two APBs
Line, 2 AHB buses and 1 32-bit multi AHB bus matrix for enhanced I/O and peripherals.
All models have 3 12 bit ADC, 2 DAC, 1 low power RTC, 12 universal 16 bit timers (package
Including 2 PWM timers for motor control), 2 general-purpose 32-bit timers.
They also have standard and advanced communication interfaces.
• Up to three I's
2C
• Six SPIs, two I's
2S full duplex. To achieve audio level accuracy, I
2S peripherals can be provided through dedicated internal audio PLL
Clock, or use an external clock for synchronization.
• Four USARTs and four UARTs
• One USB OTG full speed and one USB OTG high-speed (with ULPI) with full speed capability,
• Two CAN
• One SAI serial audio interface
• One SDIO/MMC interface
• Ethernet and camera interfaces
• LCD TFT display controller
• Chrome ART accelerator ™。
Advanced peripherals include an SDIO, a flexible memory control (FMC) interface, and a camera for CMOS sensors
Image head interface. For a complete list of peripherals available for each product number, refer to Table 2: STM32F427xx and
STM32F429xx features and number of peripherals.
The operating temperature range of STM32F427xx and STM32F429xx devices is - 40~+105 ° C, and the supply voltage range is
1.7~3.6 V。
If an external power supply monitor is used, the supply voltage can be as low as 1.7 V (refer to Chapter 3.17.2: Internal Reset OFF).
This series provides a comprehensive set of energy-saving modes, which can realize low power consumption application design.
The STM32F427xx and STM32F429xx devices have 8 packages, ranging from 100 pins to 216 pins. Included
Peripherals vary depending on the device selected.
These characteristics make STM32F427xx and STM32F429xx microcontrollers suitable for a wide range of applications: • motor drive and application control • medical equipment • industrial applications: PLC, inverter, circuit breaker • printer, scanner • alarm system, video phone, HVAC • home audio equipment