Delivery Time:5 working days after received your payment
Certification:CE

Brass or stainless steel water solenoid valve 1/4 inch 220V AC 2W025-08 NC Wire lead type

Specification

It is direct action type two-position two-way solenoid valve. It adopts the diaphragm seal structure,with zero differential pressure starting function,handsome shape,and large flow. It is a switch element most normally used in modern industrial pipeline.

Start working at differential pressure, the UW series valve has a completely range of solenoid valves from 1/8" to 2". UW series valve is among the oldest history valves, we have stainless steel valve and brass valve for your reference, both of SS valve and brass valve can be normal close valve and normal open valve. This series solenoid valves are most popular valves used for many conditions especially in the water treatment system.

Model NO.	2w-025-06	2w-025-08	2w-040-10	2w-160-10	2w-160-15	2w-200-20	2w-250-20	2w-320-32	2w-400-40	2w-500-50
Pipe size	1/8”	1/4”	3/8”		1/2”	3/4”	1”	1 1/4“	1 1/2”	2”
Orifce size	2.5mm	4mm	4mm	16mm	16mm	20mm	25mm	32mm	40mm	50mm
CV valve	0.23		0.6	4.8	4.8	7.6	12	24	29	48
fuild	Air, water, ol, the neutral gas,liquid
Service voltage	AC380V,AC220V,AC110V,AC24V,DC24V, (allow)±10%
Operating	Direct acting				Type	Normally closed
Body Material	Brass				viscosity	(Below)20CST
Working pressure	Water, air;0-10kgf/m2 ;oil:0-7kgf/m2
Material of seal	Standard: below 80 °C fuild temperature use NBR below 120°C use EPDM below 150 °C use VITON

Maintenance instructions:
1. attention to check the use of components, in the transport process is damaged, and then install the use of.
2. When installing, please note that the gas flow direction and the takeover are correct.
3. when using, please strictly comply with the technical requirements, such as the operating voltage, operating frequency, working pressure, the use of temperature, the whole machine debugging, it is recommended to use a manual device debugging, and then through power debugging.
4. Please pay attention to dust, it is recommended to install the exhaust port or muffler muffler throttle.
5. When connecting pipe, pay attention to only release the strap around the joint may not exceed the end face of the tooth, and pay attention to the elimination of pipe fittings, metal particles inside the pipe, dust and oil, etc