Delivery Time:5 working days after received your payment
Certification:CE

SLB high temperature or low temperature liquid (gas) nitrogen (N2), oxygen (O2), carbon dioxide (CO2) solenoid valve

SLB high (low) temperature solenoid valve

Product description:

SLB series solenoid valve, the product for a series of production, large flow, good practicality, widely used in the steam, heat conduction oil and other high temperature, and low temperature and other fluid control. Made of imported high temperature resistant tetrafluoroethylene diaphragm structure, through the medium of excellent performance. High temperature resistant coil, and thermal protection, ensure long life, high reliability.

The main technical parameters:

1. Two-position two-way, Normally closed solenoid valve,Power off, power on.

Products for the production of a series of small, large flow, a wide range of use,

2. Body material:copper, parts for stainless steel.

3. Ambient temperature:-20~65℃

4. Medium temperature: Low temperature:-100 °C~10°C

High temperature:99℃~200℃

5. Applicable medium:High temperature steam, heat conduction oil, etc., low temperature such as liquid (gas) nitrogen (N2), oxygen (O2), carbon dioxide (CO2), etc..

6. Install:Press the arrow mark on top of the valve can be any installation, to enhance the service life, best coil upward horizontally.

7. Voltage:AC24V/110V/220V/230V/240V 50/60HZ DC24V/12V

Port size (G/NPT)	Orifice (mm)	CV	Minimum pressure (MPA)	Pressure(MPA) Low temperature	Pressure(MPA) High temperature	Low temperature(°C)	High temperature(°C)
1/8,1/4	1.5	0.08	0	5	3	-100~-10	99~200
1/8,1/4	2.0	0.14	0	3	2	-100~-10	99~200
1/8,1/4	2.5	0.23	0	1.7	1.7	-100~-10	99~200
1/8,1/4	3.0	0.3	0	1.3	1.3	-100~-10	99~200
1/8,1/4	4.0	0.6	0	0.7	0.7	-100~-10	99~200
3/8,1/2	5.0	0.65	0	0.5	0.5	-100~-10	99~200
3/8,1/2	6.0	0.8	0	0.4	0.4	-100~-10	99~200
3/8,1/2	13	4.2	0.1	1.5	1.0	-80~-10	99~185
3/4	20	7.3	0.1	1.5	1.0	-80~-10	99~185
1	25	11.5	0.1	1.5	1.0	-80~-10	99~185
11/4	32	22.0	0.1	1.5	1.0	-80~-10	99~185
11/2	40	29.0	0.1	1.5	1.0	-80~-10	99~185
Flange connection
DN25	25	11.5	0.1	1.5	1.0	-80~-10	99~185
DN32	32	22.0	0.1	1.5	1.0	-80~-10	99~185
DN40	40	29.0	0.1	1.5	1.0	-80~-10	99~185

1 years warranty

Maintenance instructions:
1. attention to check the use of components, in the transport process is damaged, and then install the use of.
2. When installing, please note that the gas flow direction and the takeover are correct.
3. when using, please strictly comply with the technical requirements, such as the operating voltage, operating frequency, working pressure, the use of temperature, the whole machine debugging, it is recommended to use a manual device debugging, and then through power debugging.
4. Please pay attention to dust, it is recommended to install the exhaust port or muffler muffler throttle.
5. When connecting pipe, pay attention to only release the strap around the joint may not exceed the end face of the tooth, and pay attention to the elimination of pipe fittings, metal particles inside the pipe, dust and oil, etc

Shipment and P