Main Products: 
Vickers Solenoid Valves , Vickers Directional Valve Dg4v3 Dg4v5 Series Coil Insulation Class H
USD $1 - $10/ /Set
Min.Order:1 Set
Quick Details View All >
Business Type: Trading CompanyMain Products: 
Brass Solenoid Valves , AC220V 12V DC Normally Close 2 Way Solenoid Valves
DG4V3 Vickers Hydraulic Solenoid Valves , 1/4\" Port Solenoid Directional Valve
Pilot Operated Vickers Solenoid Hydraulic Directional Valves For Control Flow On Off
200 Bar High Pressure Solenoid Valve , Stainless Steel Solenoid Valves Air / Water
High Speed Hydraulic Proportional Solenoid Valve , Proportional Pressure Reducing Valve
1/8\" 1/4\" 3/8\" 1/2\" Port Size Hydraulic Directional Valves WIth 2.8 - 500 mm/s Viscosity Range
Product Details
DG4V3 DG4V5 series Vickers solenoid valves control operated directional
1. Specification
vickers solenoid valve
Same function as Vickers Valve
High quality
good service and price
vickers solenoid valve DG4V Series
Solenoid Energizing
Spring centered and spring offset valves will be spring positioned unless the solenoid is energized continuously.
NOTE
Any sliding spool valve, if held shifted under pressure for long periods, may stick and not spring
return, due to silting. Therefore, it is recommended that the valve be cycled periodically to prevent this
from occurring. Only DC coil voltages are available. For applications where the junction box is required, valves with F (flying lead) type coils must be driven by a DC electrical signal. The P12L models must be driven by a 110-120, 50-60 Hz AC signal. For other applications, rectified DIN connectors (‘11’ or ‘12’ in model code) can be used to convert AC input voltage to the DC voltage necessary to power the valve.
DG4V-3-40 series solenoid operated directional valves
General Data
| The total weight of one solenoid valve(with two solenoids) | kg | 2.30 |
| The total weight of one solenoid valve (with one solenoid) | kg | 1.69 |
| The total weight of one solenoid valve(with two solenoids) | Optional position | |
| The total weight of one solenoid valve (with one solenoid) | ℃ | -20~+50(adopt NBR seal ring ) |
Hydraulic Data
|
Maximum working oil pressure Oil port P,A and B |
MP a | 35 |
| The highest dynamic oil pressure T cavity can bear | MP a | 15.5 |
| The highest static oil pressure T cavity can bear | MP a | 21 |
| Rated flow | 1/min | 38 |
| Maximum flow | 1/min | 50 |
| Liquid medium | Mineral hydraulic oil, Phosphate hydraulic oil | |
| The oil temperature range | ℃ | -20~+80 |
| The oil cleanliness | ISO4572:β10≥75NAS1638:Class 9 |
Electrical Data
| Voltage category | DC,RAC(coil with a rectifier component) | ||||||
| Duty cycle | ED | 100% | |||||
| voltage allowable fluctuation range | % | -10~+10 | |||||
| The reserving and resetting time | ms | On120 off100(do not include RAC type) | |||||
| Maximum operating frequency | Hz | 3 | |||||
| Coil insulation class | H | ||||||
| The maximum operating temperature coil allowed | ℃ | 180 | |||||
| Coil weight | kg | 0.35 | |||||
| voltage | V | 12 | 24 | 48 | 110 | R110 | R220 |
| Power types | DC | DC | DC | DC | RC | RC | |
| Power frequency | Hz | 50/60 | 50/60 | ||||
| Power consumption | W | 30 | 30 | 30 | 30 | 32 | 32 |
| Coil resistance(20℃) | ohm | 4.8 | 19.2 | 76.8 | 403 | 75.2 | 313 |
| Operating current(20℃) | A | 2.5 | 1.25 | 0.63 | 0.27 | 0.38 | 0.19 |
DG4V-3-60 series solenoid operated directional valves
General Data
| The total weight of one solenoid valve(with two solenoids) | kg | DC: 2.30 AC:2.1 |
| The total weight of one solenoid valve (with one solenoid) | kg | DC: 1.7 AC:1.5 |
| Installation site | Optional position | |
| Operating temperature | ℃ | -20~+50(adopt NBR seal ring ) |
Hydraulic Data
Facebook
X
Pinterest
Linkedln