Delivery Time:5 working days after received your payment
Certification:CE
Normally Open Brass Small Gas Mini Solenoid Valve no 3/8" BSP 110V AC 4mm NBR

1. Specification

Pattern: Two-port two-position

Principium: direct acting type

Control mode: normally close

Valve body: brass

Diaphragm material: NBR: ≤80°C ,FKM≤150°C

Working pressure: 0~10bar

Max pressure: 10bar

Voltage: AC220V AC110V DC12V DC24V

Medium: Air ,water ,Liquid ,oil ect.

Application: Gas protection welder, various types of burners, test equipment small-flow air water control system

Model	Pipe	Orifice Diameter(mm)	Principium	CV	Body material	Seal	Work Pressure
MI-03	1/8" 1/4"	3	direct acting	0.3	Brass , SS304	NBR	0-10bar
MI-04	3/8"	4		0.58		NBR	0-7bar
MI-05	1/2"	5		0.65		NBR	0-5bar
MI-08	1/2"	8		1.2		NBR	0-1bar

2.Dimensions

Orifice(mm)	A	B	C
DN3	44	25	80
DN4	44	25	80
DN5	50	25	80
DN8	50	25	80

Materials of construction
Parts in contact with the medium
Valve of body	Brass	SS304
Seals	NBR ,EPDM ,FKM
Magnetic isolation pipe	SS304
Core	Stainless steel alloy
Spring	SS304
The shading	Copper

Maintenance instructions:
1. attention to check the use of components, in the transport process is damaged, and then install the use of.
2. When installing, please note that the gas flow direction and the takeover are correct.
3. when using, please strictly comply with the technical requirements, such as the operating voltage, operating frequency, working pressure, the use of temperature, the whole machine debugging, it is recommended to use a manual device debugging, and then through power debugging.
4. Please pay attention to dust, it is recommended to install the exhaust port or muffler muffler throttle.
5. When connecting pipe, pay attention to only release the strap around the joint may not exceed the end face of the tooth, and pay attention to the elimination of pipe fittings, metal particles inside the pipe, dust and oil, etc