Delivery Time:5 working days after received your payment
Certification:CE

0.5-100bar 2 way SS304 1/2 inch water high pressure solenoid valve 24V DC stainless steel

1.Specification

Pattern: Two-port two-position
Principium: directly acting type
Control mode: normally close
Valve body: brass , Stainless steel
Diaphragm material: NBR<80°C; FKM: <150°C; TEFLON: <180°C
Working pressure: 0~200bar
Max pressure: 200bar
Voltage: AC220V AC110V DC12V DC24V
Medium: air ,water, hot water , steam , oil ect.
Application: high-pressure large-flow steam water control system

Model	Pipe	Orifice mm	CV	Pressure(bar)
				AC			DC
				Air	water	Oil	Air	water	Oil
	Brass body follows:
PG-01	1/8" 1/4"	1	0.04	0-120	0-120	0-100	0-120	0-120	0-100
PG-M02	1/8" 1/4"	1.5	0.1	0-90	0-90	0-70	0-90	0-90	0-70
PG-02	1/8" 1/4"	2	0.15	0-50	0-50	0-40	0-50	0-50	0-40
PG-M03	1/8" 1/4"	2.5	0.23	0-35	0-35	0-25	0-35	0-35	0-25
	Sus304 body follows
SPG-01	1/8" 1/4"	1.2	0.05	0-200	0-200	0-150	0-200	0-200	0-150
SPG-02	1/4"	2	0.15	0-100	0-100	0-80	0-100	0-100	0-80
SPG-1001	1/4" 3/8"	6	0.8	0.5-100	0.5-100	0.5-80	0.5-70	0.5-70	0.5-50
SPG-1002	1/4" 3/8"	6	0.8
SPG-1003	3/8"	10	1.8	0.5-100	0.5-100	0.5-80	0.5-70	0.5-70	0.5-50
SPG-1004	1/2"	10	1.8

Outline dimensional

	A	B	C
PG-M02	40	30	67
PG-M03	40	30	80

Materials of construction
Parts in contact with the medium
Valve of body		Brass	SS304
Seals		FKM ,PTFE
Magnetic isolation pipe		SS304
Core		Stainless steel alloy
Spring		SS304
The shading		Copper

Electrical:
Orifice	Power			Class of Insulation	Model of coil
	AC		DC
	VA	W	W
DN1.2	39	24	30		D16021
DN1.5/2.5	19	11	18	H	D16011
DN10	39	4	30		D16021

1 years warranty

Maintenance instructions:
1. attention to check the use of components, in the transport process is damaged, and then install the use of.
2. When installing, please note that the gas flow direction and the takeover are correct.
3. when using, please strictly comply with the technical requirements, such as the operating voltage, operating frequency, working pressure, the use of temperature, the whole machine debugging, it is recommended to use a manual device debugging, and then thr