Delivery Time:1-30 work days
Certification:CE

KBCG series Proportional control valves Hydraulic Directional Valves

Specification

[Technical Data]

General parameters

Quality KG	3.4
Installation location	Arbitrarily
Storage temperature range ℃	~20~+80
Ambient temperature range ℃	~20~+70

Maximum operating pressure, port A, B and X Mpa	35
Port Y	Independent zero pressure to tank
Maximum set pressure, the pressure level 4 Mpa	0.6-4
Pressure Level 10 Mpa	0.8-10
Pressure Level 16 Mpa	0.85-16
Pressure Level 25 Mpa	0.85-25
Pressure Level 35 Mpa	0.9-35
Maximum flow 1/min	5
Pilot flow 1/min	1
Hydraulic medium	Mineral hydraulic oil Phosphate ester hydraulic oil
Oil temperature ℃	-20~+80
Viscosity range	2.8-500
The maximum allowed level of oil pollution	NAS1638 Level 7
Hysteresis (a reference command value pressure characteristic curve) ≤％	5
Repeatability ≤％	1
Linearity ≤％	Maximum set pressure±3.5

1. Specification

Functional description:
The valve is a direct valve controlled by proportional solenoid, it is mainly used for small hydraulic system according to input current, and always used to be taken as the pilot relief valveof a second pressure valve.

1. It is a single-stage valve open loop can be used to directly control the small flow system pressure, or the pressure for greater pilot control valve.
2. Delay return valve, high repeatability.
3. supporting the valve and electric controller, it can be used with ADF11 proportional amplifier.
4. has five pressure ranges, you can still choose one.