Durable Ground Source Heat Pump and Chiller with LUTE Brand and Efficiency Performance
USD $499 - $5,998 /Set
Min.Order:1 Set
Shandong Lvte Air Conditioning System Co., Ltd.
Application and Introduction
Used an area of 100m 2~ 1000m2 building. It can make free living hot water for demand as Villa, hotel, restaurant, factory, theater, stadium, residential quarter, textile, food, medicine, metallurgy etc;
STRUCTURE
Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents;
HERMETIC COMPRESSORS
Use brand semi-closed worm or hermetic scroll compressor with low energy consumption, stable operation, and little vibration and low noise;
EVAPORATOR&CONDENSER
High efficiency tube in tube heat exchanger, factory insulated with flexible close cell material;
REFRIGERANT CIRCUIT
Copper tube connection with charge valves, filter, thermostatic expansion valve, gas-liquid separator, high pressure switch and low pressure switch.The heat pump units are complete also with 4-way valve and one way valve;
Model Specification:
LT W H (R) --- 020
LVTE Company
Scroll Compressor
Small Size Heat Pump for Residence, Villas or Houses
Units Type, R for Heat Pump(Heating and Cooling)
Model No.
Technical Data: LTWH(R)020---LTWH(R)-100 | ||||||||||||||
Model No. LTWH(R)— | 020 | 025 | 030 | 035 | 040 | 050 | 060 | 065 | 075 | 090 | 100 | |||
Heating Capacity | kW | 8.6 | 10.2 | 12.0 | 14.7 | 17.7 | 21.6 | 24.2 | 26.5 | 30.0 | 36.0 | 41.0 | ||
104kCal/h | 0.7 | 0.8 | 1.0 | 1.2 | 1.5 | 1.7 | 1.9 | 2.2 | 2.6 | 3.0 | 3.5 | |||
Cooling Capacity | kW | 7.2 | 8.6 | 10.1 | 12.2 | 15.0 | 18.2 | 20.3 | 23.0 | 26.0 | 31.0 | 37.0 | ||
104kCal/h | 0.6 | 0.7 | 0.8 | 1.0 | 1.2 | 1.5 | 1.7 | 1.9 | 2.2 | 2.6 | 3.0 | |||
Electrical Parameters | Power | 3/N/PE AC220V/380V 50HZ | ||||||||||||
Input | Heating | kW | 1.9 | 2.3 | 2.7 | 3.4 | 4.0 | 4.7 | 5.3 | 6.1 | 6.9 | 7.9 | 9.5 | |
Power | Cooling | kW | 1.2 | 1.5 | 1.7 | 2.2 | 2.6 | 3.2 | 3.5 | 4.0 | 4.5 | 4.8 | 6.1 | |
Control System | Dedicated heat pump controller,PID regulator | |||||||||||||
Security | Overload, high voltage, wrong Phase, water, oil, antifreeze switch, high temperature protection | |||||||||||||
Compressor | Form | Flexible all closed scroll(American Copeland, Germany Bizter, Danmark Danfoss etc.) | ||||||||||||
Quantity | set | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||
Refrigerant | Type | Environmental protection Refrigerants(R134A,R410A,R407C etc.) | ||||||||||||
Charge | kg | 1.4 | 1.6 | 2 | 2.2 | 2.7 | 3.2 | 3.7 | 4.2 | 4.8 | 5.7 | 6.8 | ||
Evaporator | Form | High Efficient Tube in Tube Heat Exchanger | ||||||||||||
Water | Heating | m3/h | 1.7 | 2 | 2.4 | 2.9 | 3.5 | 4.3 | 4.8 | 5.2 | 6 | 7.2 | 8.3 | |
Flow | Cooling | m3/h | 1.4 | 1.7 | 2 | 2.4 | 3 | 3.6 | 4 | 4.6 | 5.2 | 6.2 | 7.4 | |
Pressure Loss | Kpa | ≤40 | ||||||||||||
Dirt Factor | m2·°C/kW | 0.018 | ||||||||||||
Interface Dim. | DN(mm) | 25 | 25 | 25 | 32 | 32 | 32 | 40 | 40 | 40 | 50 | 50 | ||
Condenser | Form | High Efficient Tube in Tube Heat Exchanger | ||||||||||||
Water | Heating | m3/h | 1.4 | 1.7 | 2 | 2.4 | 3 | 3.6 | 4 | 4.6 | 5.2 | 6.2 | 7.4 | |
Flow | Cooling | m3/h | 1.7 | 2 | 2.4 | 2.9 | 3.5 | 4.3 | 4.8 | 5.2 | 6 | 7.2 | 8.3 | |
Pressure Loss | Kpa | ≤40 | ||||||||||||
Dirt Factor | m2·°C/kW | 0.044 | ||||||||||||
Interface Dim. | DN(mm) | 25 | 25 | 25 | 32 | 32 | 32 | 40 | 40 | 40 | 50 | 50 | ||
Shape size | Length | mm | 1000 | 1000 | 1000 | 1000 | 1000 | 1100 | 1100 | 1100 | 1100 | 1200 | 1200 | |
Width | mm | 600 | 600 | 600 | 600 | 600 | 660 | 660 | 660 | 660 | 660 | 680 | ||
Height | mm | 800 | 800 | 850 | 850 | 850 | 880 | 880 | 880 | 880 | 880 | 880 | ||
Unit weight | kg | 140 | 140 | 150 | 180 | 220 | 260 | 280 | 300 | 350 | 420 | 490 | ||
Noise | dB(A) | <60 | <60 | <62 | ||||||||||
Heat recovery (Selected by requirements) | Type | Circulation-type casing Efficient Tube in Tube Heat Exchanger | ||||||||||||
Water interface | mm | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 32 | ||
Hot water Volume | m3/h | 0.3 | 0.35 | 0.45 | 0.48 | 0.6 | 0.8 | 1 | 1.1 | 1.15 | 1.37 | 1.64 | ||
Notes: | ||||||||||||||
1.Cooling Standard Conditions:User side water inlet/outlet 12°C/7°C;Water source side inlet/outlet 30°C/35°C. | ||||||||||||||
2.Heating Standard Conditions: User side hot water inlet/outlet 40°C/45°C;Water source side inlet/outlet 15°C/7°C; | ||||||||||||||
3.Heat recovery equipments can be added for free sanitary hot water. |
Production Pictures:
Geothermal Ground Source Heat Pump Systerm Diagram:
Company Products Catalog: