Specifications

Water Cooled Chiller
-For Industrial to Supply Chilled Water
-CE,CRAA
-Cooling Tower Needed
-Large Cooling Capacity

 Screw Compressor LTLS Series Water Cooled Water Chiller,Industrial Chiller,Water to Water Chiller for Cooling Only with Bitzer,Refcomp,Hanbell Screw Compressor in Commerical Building

Features:

1.Twin screw compressors of world famous brand is adopted, with high efficiency, low noise level, less wearing and long operation time;

2. The unit is of high performance as they are made of the condensers and evaporators of grooved copper pipes, and high quality components, by specialized process;

3. The unit is easy to operate, and friendly interfaced, as they adopt leading brand PLC, 64K color touch screen and other control elements;

4. The energy saving for Multi-capacity regulation resulted in cost cut down for operation and maintenance.

Two Types:

Single Compressor Units: LTLS30---LTLS200    100KW-850KW COOLING RANGE

Double Compressor Units: LTLS60-LTLS400     200KW-1700KW COOLING RANGE

System Control:

1. Imaged system operation chart, showing the temperature of water in/out, the energy level of compressor run, on/off button, run time, alarm etc. And the remote turn on/off function is available. PC remote control is optional;

2. Notice for maintenance is indicated according to the accumulated run time of the compressor.It is convenience to maintenance;

3.The control system will automatically balance the run time for each compressor for mult-compressor unit.

Models Specifications:

1.Colling Condition:Chilled water in/out 12/7°C; Cooling water in/out 30/35°C;

2.Power supply: 3P-380V-50HZ;with voltage allowance ±10%,voltage dif between the phase lines±2%;

A.Single Compressor: LTLS30WS---LTLS200WS

MODEL LTLS-		30WS	40WS	50WS	60WS	70WS	80WS	90WS	100WS	110WS	120WS	130WS	140WS	160WS	180WS	200WS
Cooling Capacity(KW)		100	136.5	176	233.6	256	319.2	349.3	378.1	416.2	495	523	572	643.9	749.9	823.6

B.Double Compressor: LTLS60WD---LTLS400WD

MODEL LTLS-		60WD	80WD	100WD	120WD	140WD	160WD	180WD	220WD	240WD	280WD	300WD	340WD	380WD	440WD	460WD
Cooling Capacity(KW)		200	273	352	467.2	512	638.4	698.6	756.2	832.4	990	1046	1144	1288	1489	1647

Safety Protections:

1. Discharge check value:it prevents the discharged gas from going back after the compressor stops.

2. Phase lack protection:It protects the compressor for over high voltage, voltage dificiency, and phase lack.

3. Direction protection:It protects the compressor from damage resulted from Counter direction run.

4. Oil heater: It heats the oil before the unit start, keep the good lubrication for the unit before it runs.

5. Overheat protection inside the motor of the compressor: It protects the compressor from burning down for too high coil temperature for overload, or abnormal run condition.

6. High&low pressure protection:It protects the compressor and system against extreme run condition and trouble.

7. Freezing protection:It protects the unit form too low temperature of the water out, freezing may occerat some place,resulting in freezing breaking of the evaporator.

8. Water flow protect: It protects the unit from run without water flow.

9. High temperature of chilled water protection: It works to protect the compressor in case that the load is too large, the temperature of chilled water is too high. It may result in compressor failure without this protect in the case.

Water Cooled Screw Compressor  Water Chiller in the Stock:

Water Cooled Screw Water Chiller Export:

 

Certificate of Products