Specifications

Industrial Air Cooled Chiller
-Copeland,Danfoss,Sanyo Scroll Compressor
-CE CRAA ISO
-Central Air Conditioner

 

8-120KW Industrial Air Cooled Screw Conpressor Water Chiller with Good Quality

 

  

Two Kinds of Models: Air Cooled Water Chiller/Air to Water Chiller

1. Cooling Condition: Chilled Water In/Out 12°C/7°C;Ambient 35°C

Models: LT03AS-40AD Cooling Capacity: 8KW-120KW

2.Cooling Condition: Chilled Glycol in/out -1/-5°C; ambient 35°C

Models: LT03ASL-40ADL Cooling Capacity: 4.7KW-61.6KW

 

 

Introduction:

a.With scroll, or recipocating compressor of high quality, high efficient heat exchangers, excellent system design, by excellent process, the chillers is of suffient capacity and efficiency.

b.The chillers will work stably for long time period as they are produced by excllent process, composed of reliable control components and professional control procedure.

c.Complete safety protection:

1.High&low pressure protection, pressure safety value protection;

2.Overload protection to the compressor;

3.Power supply protect for phase lack, counter phase, voltage too high and voltage deficient;

 

4.Water system protection for freezing breaking, water lack etc.

 

 

Model Specifications:
LT L F -- 30 AS
Notes: LT--LVTE Company Products Code      L--Screw Compressors                     F--Air to Water Type Chiller
30--Normal Cooling Capacity(Refrigerant Tons:RT)                   AS(AD)--Single(Double) Screw Compressor(s)

 

 

Specs of LTLF Series Air Cooled Screw Comperssor Chillers(Single Compressor Model)

 

 

Remark:1.Colling Condition:Cold water in/out 12/7°C; Environmental 35°C;

              2.Power supply: 3P-380V-50HZ;with voltage allowance ±10%,voltage dif between the phase lines±2%;
              3.The data above is for R22, contact us if that for R134a,R407c and other refrigerant need;
              4.There may be Changes for improvement without notice, confirm always before your order.

 

 

 

 

Specs of LTLF Series Air Cooled Screw Comperssor Chillers(Double Compressor Model)  

 

Remark:1.Colling Condition:Cold water in/out 12/7°C; Environmental 35°C;

              2.Power supply: 3P-380V-50HZ;with voltage allowance ±10%,voltage dif between the phase lines±2%; 

              3.The data above is for R22, contact us if that for R134a,R407c and other refrigerant need;
              4.There may be Changes for improvement without notice, confirm always before your order