Specifications

600W Single Output Switching Power Supply
AC-DC Power Supply
Input:110 / 220VAC selected by switch
Output:5V,12V,15V,24V,27V,

600W Single Output Switching Power Supply

High power density 4.9w/in³
AC input active surge current limiting
AC input range selected by switch
Protections:Short circuit/Over load/Over voltage/Over temperature
Forced air cooling by built-in DC fan
Built-in remote sense function
Low cost

MODEL	SE-600-5	SE-600-12	SE-600-15	SE-600-24	SE-600-27	SE-600-48
OUTPUT	DC VOLTAGE	5V	12V	15V	24V	27V	48V
RATED CURRENT	100A	50A	40A	25A	22.2A	12.5A
CURRENT RANGE	0 ~ 100A	0 ~ 50A	0 ~ 40A	0 ~ 25A	0 ~ 22.2A	0 ~ 12.5A
RATED POWER	500W	600W	600W	600W	599.4W	600W
RIPPLE & NOISE (max.) Note.2	150mVp-p	150mVp-p	150mVp-p	150mVp-p	150mVp-p	200mVp-p
VOLTAGE ADJ. RANGE	4.75 ~ 5.5V	10 ~ 13.5V	13.5 ~ 16.5V	22 ~ 26.4V	24 ~ 30V	43 ~ 56V
VOLTAGE TOLERANCE Note.3	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
LOAD REGULATION	±2.0%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
SETUP, RISE, HOLD TIME	1000ms, 50ms, 20ms/230VAC,  1000ms, 50ms, 50ms/115VACat full load
INPUT	VOLTAGE RANGE	90 ~ 130VAC / 180~260VAC selected by switch, 254~370VDC
FREQUENCY RANGE	47 ~ 63Hz
EFFICIENCY (Typ.)	78%	83%	84%	87%	87%	88%
AC CURRENT	12A / 115VAC, 7.5A / 230VAC
INRUSH CURRENT (max.)	25A / 230VAC, 50A / 230VAC
LEAKAGE CURRENT	<2.0mA / 240VAC
PROTECTION	OVERLOAD	110~135% rated output power
Protection type : Shut down o/p voltage, re-power on to recover
OVER VOLTAGE	5.75 ~ 6.3V	13.8 ~ 16.2V	18 ~ 21V	27.6 ~ 32.4V	31 ~ 36.5V	57.6 ~ 67.2V
Protection type : Shut down o/p voltage, re-power on to recover.
OVER TEMPERATURE	85ºC± 5ºC (TSW1) Detect on heatsink of power transistor
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.,HUMIDITY	-20 ~ +60ºC (Refer to output load derating curve), 20 ~ 90% RH
STORAGE TEMP., HUMIDITY	-40 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT	±0.05%/ºC (0 ~ 50ºC)
VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	Design refer to UL60950-1
WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
OTHERS	MTBF	197khrs min. MIL-HDBK-217F (25ºC)
DIMENSION	247*127*63.5mm (L*W*H)
PACKING	2.1Kg; 6pcs/13.4Kg/0.98CUFT
NOTE	1.All parameters are specified at 230VAC input, rated load, 25ºC. 70% RH. Ambient. 2.Tolerence: includes set up tolerance, line regulation, load regulation. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.