PRODUCT NUMBER

No. 1022 EPOXY MOTAR

TYPE

The mortar based on Epoxy Resin, hardener and quartz sands.

USES

Used for the ground in such as heavy equipment facilities, chemical plants, electronics industry, assembly plants, laboratories, GMP pharmacies, operating room, waste-water treatment plants, garages, vehicle ramp and warehouse etc.

CHARACTERISTICS

1. Excellent adhesion with the surface of concrete and steels, no cracking and no peeling

2.  Excellent mechanical properties, resistant to forklift and large vehicles rolling.

3.  Resistant to a broad range of chemicals such acids, alkalis and solvents etc.

4. Unaffectedby cold and hot temperature difference to deform.

5.  Seamless, abrasion resistant, and good thermal insulation.

COLOR

Natural and desired colors.

SPECIFIC GRAVITY

Above 1.1 Kg/L(mixture)

FINISH

Flat

VISCOSITY

Paste(mixture)

DRYING TIME

Set-to-touch 6 hr.  

Dry hard 12 hrs (25 ℃)

Fully Cured 7days

OVERCOATING INTERVALS

Min.   12 hrs.  (25 ℃)

OPTIMUM FILM THICKNESS

3 m/m   or   5 m/m

THEORETICALCOVERAGE

7 Kg/m2 (3m/m)

11.5 Kg/m2     (5m/m)

MIXING RATIO

Base : Hardener : Sand = 3 : 1 : 20   ( by wt. )

POT LIFE

30 min(mixture, 25 ℃)

THINNER  

No.1005 Epoxy Thinner(SP-12)(cleaning tools only)

SUBSEQUENT COATS

No.1001 EpoxyTopcoat(EP-04)

No.1015 Epoxy Coating, Solventless

No.1026 Epoxy Mortar Putty

STORAGE SHELF LIFE   

Minimum 1 year under normal storage conditions.

APPLICATION METHOD  

Hand trowel

NOTE

1.Evenly mix base and hardener according to the mixing ratio then blend the quartz sand to stir thoroughly.

2.  Avoidapplyingthe compound in rainy weather or the relative humidity exceeded 85% RH, particular a wet surface must be thoroughly dried.

3. The moisture content of concrete substrate must be under 12%. If exceeded, it must be force-dried.

4.Concrete substrate must reach compressive strength over of 150 kg/cm2 and free from dust, sand and oils.

5. Pleasewear gloves to avoid touching skin when applying.

6.The mixing ratio is standard, if you have the special demand please ask the technical department.