PRODUCT NUMBER

No. 1030

TYPE

Two pack, A high performance tile-like coating, based on water-borne catalyzed acrylic epoxy binder, with pigments and some functional additives. 

USES

Decoration, and protection of concrete, masonry, cement plaster, steel structures, aluminum, etc. 

CHARACTERISTICS

1. Good, stain-removal properties.

2. Good weather ability.

3. Good corrosive and chemical resistant properties.

4. High performance, Comparable to solvent epoxy.

5. No flammable and No hazardous waste generated.

GLOSS

Above 60%

COLOR

White and desired color 

SPECIFIC GRAVITY

Above 1.05 kg/L (Mixer) 

DRYING TIME (25 ℃)

Above 30℃

DRYING TIME(25℃)

Set-to-touch 2 hr

Dry Hard 10 hr

Fully Cured 14 days

OVERCOATING INTERVALS

min. 18 hrs.      

OPTIMUM FILM THICKNESS

Wet 100 mircons

Dry 40 microns

THEORETICAL COVERAGE 

37.8 meter square/Gal       10.0 meter square /L

THINNER

Water 0~5%

PRECEDING COATS

Concrete:

No.410-1 Emulsion Paint Primer.

No.420 Solvent- Based Elastomeric Sealer.

No.1030CP Water-Based Epoxy Clear Primer.

Metal:

No.1035 Water-Based Epoxy Aluminum Tripolyphosphate Primer.

No.500P Galvanized Steel Emulsion Paint.

No.1011(75μ)/ No.1075(100μ)/ No.1030(40μ)/

STORAGE SHELF LIFE

Minimum 1 years under normal storage conditions.

APPLICATION METHOD

Airless Spray,Brush

NOTE

1. Before application, stir paint thoroughly, and when paint is too thick, the tap water within specified quantity can be added.

2. The moisture content of new constructed cement walls should be under 12 5%. If not, the application has to wait for 2 or 3 weeks until the walls is dry enough. 

3. Adhered moisture, grease, and dirt on substrate must be cleaned thoroughly. 

4. The practical coverage will depend on the shape or objects of environmental conditions. Generally, the theoretical coverage for brush, and spray will be 1.4 times, and 1.7 times as to their practical coverage.