explain

C2000 ™ The 32-bit microcontroller has been optimized for processing, induction, and driving, which can improve the closed-loop performance of real-time control applications such as industrial motor drivers, photovoltaic inverters and digital power supplies, electric vehicles and transportation, motor control, and induction and signal processing. The C2000 series includes advanced performance MCU and entry-level performance MCU.

The F2803x series microcontroller integrates the performance of the C28x core and Control Law Accelerator (CLA) with highly integrated control peripherals into low pin devices. The code of this series of devices is compatible with older versions based on C28x and has a high level of analog integration.

An internal voltage regulator enables single power rail operation. The HRPWM module has been strengthened to achieve dual edge control (frequency modulation). An analog comparator with a 10 bit internal reference has been added, which can be directly routed to control PWM output. ADC can implement conversion within a fixed full scale range of 0V to 3.3V, supporting proportional operation of VREFHI/VREFLO benchmarks. The ADC interface has been optimized for low overhead and latency.

characteristic

Efficient 32-bit CPU (TMS320C28x)

– 60MHz (16.67ns cycle time)

– 16 × 16 and 32 × 32 MAC operations

– 16 × 16 Dual MAC

Harvard Bus Architecture

- Sequential operation

- Fast interrupt response and handling

- Unified Memory Programming Model

- Efficient code (using C/C++and assembly language)

Programmable Control Law Accelerator (CLA)

-32-bit floating-point mathematical accelerator

- Code execution independent of the main CPU

Byte order: Small end byte order

Support for JTAG boundary scanning

- IEEE Standard 1149.1-1990 Testing Access Ports and Edges

Boundary scanning architecture

Both devices and systems can achieve low cost:

-3.3V single power supply

- No power timing requirements

Integrated power on reset and undervoltage reset

- Low power consumption

- No analog support pins

• Clock:

- Two internal zero pin oscillators

On chip oscillator and external clock input

- Watchdog timer module

- Lost clock detection circuit

Up to 45 channels with input filtering function and individually programmable

Multiplexing GPIO pins

Peripheral Interrupt Extension (PIE) module that supports all peripheral interrupts

Three 32-bit CPU timers

Each enhanced pulse width modulator (ePWM) has an independent

16 bit timer

On chip memory

- Flash memory, SARAM, OTP, boot ROM available

• Code security module

• 128 bit security keys and locks

- Protect secure memory blocks

- Prevent firmware reverse engineering

• Serial port peripherals

- A serial communication interface (SCI) universal asynchronous receiver/transmitter

(UART) module

- Two Serial Peripheral Interface (SPI) modules

- An internal integrated circuit (I2C) module

- A Local Interconnection Network (LIN) module

- An Enhanced Controller Area Network (eCAN) module

Enhanced control peripherals

- ePWM

- High Resolution PWM (HRPWM)

- Enhanced Capture (eCAP) module

High Resolution Input Capture (HRCAP) module

Enhanced Quadrature Encoder Pulse (eQEP) Module

Analog to Digital Converter (ADC)

On chip temperature sensor

- Comparator

Advanced simulation features

- Analysis and breakpoint functionality

- Real time debugging through hardware

• Packaging options

-56 pin RSH Very Thin Quad Flatpack

Line (VQFN)

64 pin PAG Thin Quad Flatpack (TQFP) package

-80 pin PN Low Profile Quad Flatpack (LQFP)

encapsulation

• Temperature options

- T: -40 ° C to 105 ° C

- S: -40 ° C to 125 ° C

- Q: - Environmental temperature range from 40 ° C to 125 ° C

(Approved by AEC Q100 for automotive applications)

application

Air conditioning outdoor unit

Drive control of elevator door automatic opening and closing device

• DC/DC converter

• Inverter and motor control

• On board charger (OBC) and wireless charger

• Automatic sorting equipment

Textile machines

Welding machine

• AC charging (pile) station

DC charging station

Electric vehicle charging station power module

Vehicle wireless charging module

Energy Storage Power Conversion System (PCS)

• Micro inverters

Solar power optimizer

• String inverter

• AC driver control module

• Linear motor segmented controller

Servo driver power stage module

• AC input BLDC motor driver

DC input BLDC motor driver

• Industrial AC DC

• Three phase UPS

• Commercial network and server PSU

Commercial communication power rectifier