TDNA-1 mud sand content tester is provided by our company. If you want to know more about the price, specifications, process, performance and operation, please call Shanghai Mei-yu Instrument Equipment Co., LTD. This product is guaranteed for one year. During the warranty period, except for the maintenance expenses which are not covered by the warranty, other expenses including component costs, working hours, travel expenses and transportation costs shall be borne by our company. Our products will be strictly checked or tested when they leave the factory, so the probability of quality problems is very small. Our company insists on starting from the details, strict quality control, strive to achieve excellence.

TDNA-1 type mud sand content tester Technical parameters:

Structure and technical data: It is composed of a filter cylinder equipped with a 200-mesh screen, a funnel corresponding to the diameter of the filter cylinder and a glass measuring tube with 0 ~ 100% scale. The scale on the tube: below 15% for each small cell is 0.5%, 15% ~ 30% for each small cell is 1%.

How to use:

1. Fill the mud to the mark marked with "mud" on the test pipe, add water to the mark with "water", block the pipe mouth and shake;

2. Pour the mixture into the filter cylinder, throw the liquid through the filter screen, add water in the measuring tube, shake and then pour into the filter cylinder, repeat until the measuring tube is clean;

3, wash the sand on the screen with clean water, remove the residual mud;

4. Put the funnel into the filter barrel, then slowly turn it over and insert the funnel into the tube. With clean water attached to the screen on the sand all rushed into the pipe;

5. After sand precipitation, read out the percentage of sand;

6. Clean and dry the instrument and put it in the box.